SeckSeySam
Registered User
Hello, My name is Sam. This is my first post on this site. But I wanted to Make a build Thread so everyone can see what Im doing. First of all I have a 03 2500HD with a LQ4 6.0l, 4L80E tranny, with a 14BFF rear axle. I have a few bolts on like cold air intake, Programer, True Dual 3" exhaust going threw two Flowmaster Super 44's, Detroit locker in the rear with a motive gear carrier, Lift keys, 2 inch rear blocks, 3" body lift rolling on 35s. It a pretty decent truck. But a chevy on 35s isn't to original and has been done alot. Couple months ago I bought a 92 Dodge w250 with a Cummins for $1500. So after alot of reserch I decided im gonna swap it into my chevy cause I have never seen it done to a newer chevy. I am gonna scrap the front IFS and swap in the Dana 60 from the dodge and put in some 13" springs. I plan on rollling on atleast 42" tires. Sorry for the long introduction. This weekend I am pulling the drivetrain from the dodge to get it all fixed up and painted. I'll post some pictures then of what Im doing, aslong with some before pictures of my chevy including fender height measurments. If you plan on following this thread it's not gonna be a weekend build. I plan on atleast taking 6 months