1991 Ford F-350 7.3 IDI ATS Turbo replacement HELP

[KyleLaFlamme]

Good Evening, My name is Kyle and recently purchased a 1991 Ford F-350 7.3 IDI Diesel that didn't come stock with a turbo but was installed via ATS turbo kit. I believe it was a 093 ATS kit. The Turbo has Garrett on it and the following info:
Serial No: BGP0016
Part No: 472553-0000
Any help relating it to a current model for replacement would be greatly appreciated. The exhaust side split and isn't repairable.
Thank you,
Kyle

 

[icanfixall]

Welcome to the forum Kyle. What do you mean.. "the exhaust side split".. If an exhaust manifold is cracked they are replaceable easy. Every idi engine. Even the 6.9 uses the same passenger side exhaust manifold. There are 2 different drivers side exhaust manifolds. One fits the truck applications and the other fits the van applications. We can't switch those to run in a truck or van. You need the manifold for a truck or a van to run an idi in those rigs. Now if you are saying the turbo exhaust elbow has split, well that can be welded. If its the pipe coming off the turbo outlet elbow then thats replaceable too. Please explain better what is split so others might help.

 

[KyleLaFlamme]

It is cracked on the Turbo housing on the exhaust side

 

[KyleLaFlamme]

You must be registered for see images attach

 

[typ4]

Is it wastegated? if so I can help you.

 

[KyleLaFlamme]

I think so

 

[KyleLaFlamme]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach