Search results

  1. jwalterus

    want to trade for a seat for a suburban

    Need a driver's seat for a 1998 suburban. Tan heated leather. Really just need the seat bottom (or even a seat bottom frame), it broke by the left front mounting bolt so now it has a "gangster lean" that irritates me. I have a 1991 F-150 XLT extended cab with tan interior (dash not available...
  2. jwalterus

    87vs91 fuel tank difference

    Anyone know what the actual difference would be in this application? The rear tank on my truck is shot, I previously extended the life by a few years with some roll-on bedliner, but it's toast at this point. I have a '91 F-150 I can snag the rear tank from (it was a new poly replacement a...
  3. jwalterus

    1925 Chevy C-cab

    I saw this this morning on facebook, not too unusual in my neck of the woods, but since he's got a valid title, it might be good at that price for someone who would need to ship it.
  4. jwalterus

    bus

    https://www.bismanonline.com/1961_international_harvester_wayne_bus_it_is_a_su?fbclid=IwAR1mPEJm7ua_TWQ5UsS7732Y-eNs79thPUvdzbzbMSDGERnGXBZCRGuJGUQ
  5. jwalterus

    Battery cables

    Time for batteries. Going to do cables as well, mine are tolerable, but I'm changing to stud top batteries, may relocate as well. The question I have is: should I go 2/0 or 4/0 for the wire?
  6. jwalterus

    Rear doors wanted

    I need some rear doors for the flood victim. The rust is getting out of hand on mine. With or without glass. Need to have working lock/latch assemblies. Do not need interior panels. Ideally they would be rust free and Wimbledon White, but as long as they have minimal or no rust, I can always...
  7. jwalterus

    I need Ford tooling P/Ns

    These guys need original Ford tooling P/Ns to find things: https://www.bismanonline.com/ford_tooling_many_many_cases_of_ford_tooling_for I misplaced my list of the IDI tooling................
  8. jwalterus

    T-case brain fart.....

    OK, brain fart............ I'd forgotten I sorta broke the t-case in the flood victim last year bajaing through the 30" overnight heavy snowfall....... It won't hold 4H, holds 2H and 4L fine, put it in 4H and it pops into neutral after driving 10 feet.... I have a '91 302/AOD/1356 set with 100k...
  9. jwalterus

    a weird one

    I have a weird one for you, whoever can figure this PITA out can have..... The knowledge that they are smarter than the techs at all the local shops that work on Dodges. :D LOL Here's the situation: Co-worker's truck. '05-ish (it's 03, 05, or 08 LOL, I can't remember) 1500, 4wd, auto, 5.7...
  10. jwalterus

    I'm buyin' a Chebby this weekend

    I need a work beater. Something that won't break the bank on fuel (wow, a whole 1 mile drive each way!!!! :rotflmao).... Not after this winter, we're looking at a house with some land, gonna be 35 miles each way. But I'm using the short commute currently for an argument that I need a little...
  11. jwalterus

    wiring

    Finally going to fix the wiring properly in the Flood Victim this summer. I have a donor 1991 F-150 so I can replace the dash (I cut a big hole in the top of mine for a quick gauge mounting plate, it was already cracked), wiring in that truck is immaculate. My issue is I have access to all the...
  12. jwalterus

    you want this

    Did the title pull you in? Make me an offer on my junk. The offer of "I'll pay the shipping" may work depending on how much work is involved in pulling the part. LOL Parts are located in BFE, also known as Minot, ND. FYI: I don't use paypal. Plan on dropping a check or M.O in the mail. If you...
  13. jwalterus

    E4OD for SBF needed

    Need a good E4OD for my dad's truck with a 302. truck is a '92, current trans is done, pulled the pan and it's full of metallic sludge
  14. jwalterus

    '88 w/ 6.9 turbo for $1200 (Burlington ND)

    http://www.bismanonline.com/1988_ford_one_ton_4x4_diesel
  15. jwalterus

    rad fan

    anybody know the diameter of the stock fan? ordered a nylon flex fan for the mustang, figure I'll give one a try on the truck sans clutch (I'll make a spacer/adapter to fit) and see what happens, but it's dark out and I'm too lazy to go with a flashlight and tape measure LOL oh, 87 short/wide rad
  16. jwalterus

    Greaseable TOB

    http://www.ebay.com/itm/322017845421 I just bought the other one they had someone grab it quick before it disappears ;Sweet
  17. jwalterus

    1994 s-10 blazer

    I refuse to fix it! LOL I bought it a year and a half ago for a work runner for myself, wife loved it so she took the damn thing as her daily driver. :rotflmao 4.3 vortec, auto, 4-door Tahoe LT version (power everything, leather interior, etc.), 123407 miles not the prettiest exterior (1994...
  18. jwalterus

    FREEBIE Freightliner

    http://www.bismanonline.com/minot_nd/12_7_liter_detroit_overhauled I don't have room or I'd be calling work to say I was gonna be late LOL
  19. jwalterus

    complete breakdown diagrams of 7.3 IDI

    I just realized, there are COMPLETE IDI breakdown diagrams available for free after responding to another thread, I never looked in-depth at it until tonight :rotflmao http://www.boats.net/parts/search/Merc/Mercruiser/1994/473B1F0GS/parts.html listed as a marine application, but it's all...
  20. jwalterus

    oil pump changed in the truck

    Well, truck was down for a bit, oil pressure dropped to 2 psi one day in January and I limped it home, checked the pressure gauge first (doesn't read below 5psi), hooked it up to a good gauge and saw the 2 psi, changed oil and filter, no change and a lot of cussing, and decided to wait until it...
  21. jwalterus

    buying fuel at Menards

    got the truck started, letting it warm up I'm heading into town to Menards, going to buy fuel there of all places....... diesel is currently over 4.60/gal around here I'm picking up a few cases of the $0.99/quart oil (it's on sale here for $0.79/qt) to run as supplemental fuel since it's...
  22. jwalterus

    Chinese junk is garbage

    stronger clutch pushrod I have been eating clutch pedal pushrods this winter, been going through one every time it's below -10*F, they fail right at the threaded joint in the 2-piece rod every time (lifetime warranty on the master cylinder, but those are such fun to change, I'm pretty...
  23. jwalterus

    pain in the crotchular region

    friggin block heater died last night, woke up to -17*, currently 2 above, been trying to get it running all day, I'm about ready to fire up the mustang just to go into town..
  24. jwalterus

    why pissed off and -25 don't mix.....

    was -25* (actual) monday morning when I started the truck to go to work, was a little irritated and MAY have pressed the clutch a little hard :rolleyes: needless to say.... I spent a few hours in todays relative warmth (-2) at the junkyard and in my driveway replacing some pedals
  25. jwalterus

    friggin clutch

    well, last spring my clutch MC died a spectacular death (when the reservoir blows off the MC it makes one heck of a mess), replaced it and had crappy clutch all summer, it was useable but I had resigned myself to the fact that it was going to suck then the slave dies last week, replaced that...

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,789
Members
24,099
Latest member
IDIBronco86

Staff online

Members online

Total: 744 (members: 7, guests: 737)

Share this page

Top