Search results

  1. reset2

    The Official "Show Us Your Ride" pictures of member's trucks thread.

    I have a 1990 F250 7.3 and purchased a gear box that works like new. No more wondering going straight. I emailed them about a referral. This is the reply so it will be a savings for anyone that reads this and buys something. Hello Robert, No, we Don’t have any type of referral program, but we...
  2. reset2

    E4oD check valve

    Thanks for the thread. I have a R110 that is holding heat. Got to get my 2000 F250 in my shop to check the cooler lines and most likely a new bypass cooler kit is needed and a cooler flush.
  3. reset2

    Flushing a E4OD or 4R100

    Now that is a great run down for changing the transmission fluid. Thanks I made a document for archiving.
  4. reset2

    Losing Prime

    I have a truck in need of a head gasket so I can't drive it, I just move it around the house every month or two. Last time I removed the bleeder Schrader valve and pulled a vacuum with a hand pump. Started fine, not practical. Anyway if there is a strong smell it must be dripping on the hot...
  5. reset2

    2025 Oilburners IDI Rally!

    It was a great time with my IDI friends at the rally. The Hazy Muesum was nice the the chatting at the winery was also a plus. Traffic was typical capital region busy but we made. Thanks do much Mike for sponsering the event.
  6. reset2

    2025 Oilburners IDI Rally!

    Just got a whim to check out the rally dates and found it to be this week. :) Not sure what days yet I will be there but on the surface Wed-Sat sometime. My 1990 has been down for 4 years waiting for me to get my act together and fix the motor. Thinking it has the cavitation issue since I...
  7. reset2

    Motorcraft ZD-29 Glow Plugs

    "ZD-9 availability and the controversy about ZD-29" I have only used the ZD-9 before what is the difference of the 29's? Yes I had the same clicking thing going on before and found at least 3 bad. Have you had the issue with the two wires going thru the connector block melting open. I found that...
  8. reset2

    So what did you do with your truck today?

    Your set up looks great and new. Looks like you made the blue bracket but where did you get the filter housing and filter. I need to do that to mine also. Looks like you been tinkering also new rad, new alt, and possible a new sidewinder set up. The best thing I did to mine was a factory turbo...
  9. reset2

    2020 Oilburners New Hampshire rally

    I'm sorry to report that I will be missing this years rally. Been burning the candle on both ends for a while now and have to stay around here. No mufflers great looking camper. You will need to go some additional camping with that new rig. Quite a upgrade from the Michigan rally. This covid...
  10. reset2

    2020 Oilburners New Hampshire rally

    Not sure about us coming this year so far. Hope it's a great rally for attendees. About the v iris stuff, if you want to learn what is suspect go to LondonReal.tv for some pretty troubling information. Is the pandemic real? Sent from my SM-G935V using Tapatalk
  11. reset2

    Inner fenders

    I will give an update on gaser to IDI when I get around to swapping mine, but thats not on the top of the list now.
  12. reset2

    Inner fenders

    Hey partner. I realize everyone has a personal emergency (even I do sometimes) and others are busy so time will lapse for responses. I just now saw your post. My liners are rather thick. Learned long ago factory anything is better than knockoffs. You will learn also. I too would like to pick...
  13. reset2

    Drilling hitch to fit new truck?

    As long as you don't extreme load the tongue it will be fine. The things that I fret about is the 6 bolts that hold my hitch to the frame. Its always a good idea to check this from time to time. Sent from my SM-G935V using Tapatalk
  14. reset2

    Too loud?

    Yea I agree. Sent from my SM-G935V using Tapatalk
  15. reset2

    Too loud?

    I kinda like the diesel rattle. Those new diesels lost their way, but maybe its cost hp to make noise. My two sons make much more power and are quite (2004 ford and 2014 ford)[emoji1] Sent from my SM-G935V using Tapatalk
  16. reset2

    I’ve got a tick...

    Having an issue with my IDI also. Been troubleshooting from the driver's seat for a while now. I'm thinking mine is a sticking lifter. Sometimes it runs very strong and quite then other times I hear a slight miss and a tapping. Looks like now when I repair my muffler I will also be replacing my...
  17. reset2

    Too loud?

    My son Jon put a 4 inch flowmaster muffler. Then we used a Powerstroke tailpipe 3.5 inch. NA it was much quieter than a faster, but once I turboed it it was perfect. After about 50k miles the muffler went bad. Next up is a 3 inch Flowmaster with the same power stroke tail. Let you know in a...
  18. reset2

    2020 Oilburners Rally Location Voting

    That is correct you have to be logged in to vote. I just now found the voting thread from a email update that Tapatalk put out on Nov 17. PSD lift pump assembly Been seeing these around a bit. Used on powerstrokes from 99 to 03. Could be a good alternative to a facet lift pump? Gu...
  19. reset2

    The Official "Show Us Your Ride" pictures of member's trucks thread.

    I added a third front spring to lift some and still ride fairly smooth on my F250. Put F350 rear spacer blocks and re arched for a lift there also. Sent from my SM-G935V using Tapatalk
  20. reset2

    My WMO setup (just getting started)

    Hey Chris did you get your wmo setup preforming? I need to post some my setup pics also. Sent from my SM-G935V using Tapatalk
  21. reset2

    2020 Oilburners Rally Location

    Thinking No Mufflers New Hampshire trip would work. Only been in new Hampshire once and that was Elijah's rally. Now for a pic I happened to take. Found my pot of gold at the end of a rainbow. Sent from my SM-G935V using Tapatalk
  22. reset2

    The Official "Show Us Your Ride" pictures of member's trucks thread.

    I was not very clear but I own this truck but the rainbow ended on it. Sent from my SM-G935V using Tapatalk
  23. reset2

    The Official "Show Us Your Ride" pictures of member's trucks thread.

    Found my pot of gold yesterday. Working at the family farm in Maryland. 1990 7.3 NA orginally but turbo off a 94. Love old iron. Sent from my SM-G935V using Tapatalk
  24. reset2

    IDI into a Clark 55 loader

    Look up "Deboss Garage" on YouTube. Several vids on the double D engine. Sent from my SM-G935V using Tapatalk
  25. reset2

    Oilburners 2019 Gatlinburg Rally

    Cathie and also made it home around 730 PM. Great rally. Plenty to do. Sent from my SM-G935V using Tapatalk

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,108
Members
26,430
Latest member
Brownlee5212

Members online

Total: 878 (members: 4, guests: 874)

Share this page

Top