Search results

  1. skintbackfarms

    7.3 idi motor, zf 5 trans, and t-case

    I pulled it all out Sunday. Motor runs great 173k on it. Drove truck to the house to pull it. Located in Jemison, AL. Motor was in a 89' F-350. $1000.00 obo for all of it.
  2. skintbackfarms

    WTB 7.3 injector pump

    Would like to buy one to see if that is the problem with this truck I've got. Thanks
  3. skintbackfarms

    How to crank truck with bad ing. switch

    Going to pick up a 89' CC F350 4x4 this morning and was wondering how I can get it cranked to get it on the trailer. How can I get power to the switch till I can get it home to check the ing. switch out. I looked the other night at it and key just turned all the way around in it. Thanks
  4. skintbackfarms

    WTB: Starter for a 7.3

    Looking a for a starter for the truck. Please let me know if you have one. Shipping is going to 35235.
  5. skintbackfarms

    Needing a 6.9 or 7.3 around AL

    Looking for a motor that is complete for a good price to replace the one in my 89' truck. Having to drive the bike everyday and the rain isn't fun. Thanks
  6. skintbackfarms

    7.3 into a 82' cc 3500 Chevy Dually?

    Looking to put the 7.3 out of my f250 in to this truck. Anyone have any pictures of one? Thanks
  7. skintbackfarms

    Front springs & Dana 44 question?

    Will stock superduty springs work to replace my oem springs? Anyone know the bottom plate measurements for the axle? (the one that the u-bolts goes though) Got the springs and axle free and just wanting some info for it. Thanks
  8. skintbackfarms

    Questions about power to the GP controller and manual switch......

    I hooked up a manual switch (went by the tech write up) and I don't think (I know by watching the volt gauge) that I am getting power to the glow plugs. What is the best way to check the power to the controller and to the wires for each of the glow plugs? The truck has been hard cranking the...
  9. skintbackfarms

    Steering Column

    Where is a good place to get a complete column or does someone have a good one for sale. I need one for the 89' that is in my sig.
  10. skintbackfarms

    89' F250 reg. cab 4x4 forsale 7.3 n/a 5 spd

    It has 209k on it. I just put new injectors and a pump( with return lines) on the truck last week 03/23/09. The pump has a year warranty on it. Has 305/75/r16 mudders on it. The truck runs and drives fine. Needs paint on it. Just change jobs today and stuff has got to go. $2700.00...
  11. skintbackfarms

    WHATS the correct way to seal a injector?

    i just wanted to know the way to seal one that is leaking.
  12. skintbackfarms

    Blowby

    How much is to much blowby? I am try to figure what is still wrong with this motor.
  13. skintbackfarms

    Injectors question?

    On the 89' 7.3 I got, it has a return line that runs up to #2 injector. On the 91', the #2 ties into the injector pump. Whats the difference in it? I had to put the old return part back on the #2 for the night. I have not fired the truck up yet. I got the the injectors and the return line...
  14. skintbackfarms

    Running ruff question? (missing?)

    Just bought a 89' F250 4x4 with 4:10s and started driving it home and it was is missing around 2500 rpm and up. Got back to the office with it and started to hit the pedal, it was blowing out blue / white smoke like raw fuel. What should I look for? He said he put new injectors in it in...
  15. skintbackfarms

    3 spd manual in a 90' f250

    Just a called about a truck and the guy said that it had a 3 spd in it. It has the shifter in the floor. What trans would that be? The truck has 142k on it and he has it for the past 10 years. I can get it cheap but don't know about the trans.
  16. skintbackfarms

    F 550 Parts and misc Ford stuff

    Have a front and rear end out of a F550 complete. The front is a 60 looks like and the rear is a Dana 135 (has the third member. Both axles are complete and they have 4.88 gears. The front axle needs ball joints and brakes. The rear just needs brakes. The truck was 99' and had right at 109k...
  17. skintbackfarms

    Cab lights

    About to put some cab lights on the truck. Does anyone know what the measurements are for them? Thanks
  18. skintbackfarms

    WTB - cab lights and a front Dana 44 axle

    Looking for a set of cab lights for a 91' Would like them complete and in good shape. As for the axles, I need the complete axle (in good shape) with springs. Thanks
  19. skintbackfarms

    truck won't start after ac12g plug install

    Just put in those ac12g glow plugs and the truck won't start. The WTS start comes on for only a second thats it. The controller just clicks away. Any ideas on what it could be? Thanks
  20. skintbackfarms

    91 F-250 Reg. Cab 2wd FORSALE

    I got a 91' f250 reg. cab 5spd N/A 7.3 for sale. Has 214k on it and is in good shape. New front brakes, vac pump, power steering hose, front tires, alignment, new bushings in the pivot arms and radius arms, and some more but can't think of right now. The truck runs great and I would drive it...
  21. skintbackfarms

    installing pryo

    About to put the thermocouple in this morning. What size is the tap that i need to use? Thanks
  22. skintbackfarms

    I beam bushings

    I got a 91' 2wd F250 and i need to put some I beam bushings in it. They are past being gone. My question is hard of a job is it to do and do the bushings prest in.
  23. skintbackfarms

    Center Caps

    I got a 92' f250 2wd and I am looking for the center caps (or hubcaps). If someone has some and want to sell or something please let me know. Thanks
  24. skintbackfarms

    Heat in truck not working.

    New to the site and new to Ford IDI's. Just got a 91' f-250 tonight and the heat don't work inside. It has a/c and the truck ran fine. Seems like the engine temp heated up. Also i tried it with the fan on and in the vent section. Your help would be thanks. The truck is a 91' F250 2WD...

Latest posts

Forum statistics

Threads
91,286
Posts
1,129,806
Members
24,101
Latest member
dieselmainiac

Members online

Total: 595 (members: 11, guests: 584)

Share this page

Top