Recent content by KRob

  1. K

    4BT 71 F250

    Archie, The link at the top takes you to a more complete build thread. Which would probably answer most of your questions. Engine, came out of a Freto Ley Van, i bought it in Portland and drove it to Eastern Oregon....that was a long day. I think i gave $3000 for the van. 4BT with...
  2. K

    destroked

    The first one came from the manufacture of the adapter plate and was a Rock Auto or something. It was the worse the next two have been from Napa, with a third sitting on the bench ready to go in. I have a sneaking suspicion that the factory had a bad run. At least that's what i am hoping...
  3. K

    destroked

    Ouch, you are right old thread. 6.0 starter.....i am using a 6.0 excursion starter on my 71 F250, and i will be installing my 4th starter on warranty here soon. OUCH. They have not been starting to spin as they go in and thus do not engage....Just FYI
  4. K

    destroked

    I have heard of more upset customers from FordCummins then Destroke, however on my conversion i used neither, instead i used a local guy who does it as a hobby on the side. So i have no experience with either...just from what i have read over the past few years prepping to do mine.
  5. K

    Nissan SD33 Diesel in a 2WD Jeep Cherokee?

    Also my father had a Scout with a Nissan Diesel and i dont remember it being to great...it got burned up and replaced with a 6cyl cummins gen engine.
  6. K

    Nissan SD33 Diesel in a 2WD Jeep Cherokee?

    I dont know what the exact weight was....but when i pulled the 390 and replaced it with a 4BT in my 71 F250, i am fairly certain it rides higher now....so it may not be too heavy.
  7. K

    4BT 71 F250

    I am working on a 4BT Cummins conversion into a 1971 Ford F260 ie 4x4 F250. This is where my main build thread has been. http://www.fordification.com/forum/viewtopic.php?f=22&t=65450 So here are some videos http://youtu.be/JiQZN-WBBbk http://youtu.be/J-KW3of8nfk I have done a milage...
  8. K

    Pics of IDIs still working?

    Oh lets see...that is a 1950s John Deere MC with a 2 cylinder....very long strokes. If i remember correctly i was hauling it to our mechanic's place in that picture because he was going to rebuild the front with an angle blade. Since then it now has a completely hydrolic angle blade which...
  9. K

    International sure had their hands in everything!

    I was going to bring up the fact that IH made some M1 Garands however they had production issues. I may have to pull out my books and check on the GM one i don't remember them producing M1 too. My father has a number of IH trucks one of them is a 80 Scout with a I6 3.4 Cummins stuffed into...
  10. K

    International sure had their hands in everything!

    I was going to bring up the fact that IH made some M1 Garands however they had production issues. I may have to pull out my books and check on the GM one i don't remember them producing M1 too. My father has a number of IH trucks one of them is a 80 Scout with a I6 3.4 Cummins stuffed into it...
  11. K

    Pics of IDIs still working?

    I never said i had a dodge...i have a cummins wrapped in a dodge. ;)
  12. K

    Pics of IDIs still working?

    Here's mine doing a little work...... ;Sweet Oh sorry wrong forum....i guess those darn cummins do a little more then blow smoke. ;Sweet Just thought i'd stir the pot a little! Just so i dont get banned or booed off the stage i am looking at 80-86 idi for my wife to use as her daily...
  13. K

    front bumper schematics?? anyone have some?

    Yeah thats another problem of having a heavier bumper your more likly to screw up your frame instead of busting up your front and busting a radiator and intercooler.
  14. K

    front bumper schematics?? anyone have some?

    Whats 8 in channel run? Its been a long time since Ive bought steel.
  15. K

    front bumper schematics?? anyone have some?

    So would C Channel work for just a bumper then? Im thinking hitting deer at 45, nicking the side of obstacles while moving around...farm truck type stuff?
See more

Latest posts

Forum statistics

Threads
91,332
Posts
1,130,497
Members
24,133
Latest member
Nanohawk

Members online

Total: 737 (members: 12, guests: 725)

Share this page

Top