-
-
Austin86250 replied to the thread Best Return Line Setup for Peterson CNC Caps? (1/4" vs 3/16" Hose).This is the digram of how mine is routed if you desire to get different caps No fittings on this set up just caps and lines All 1/4” In... -
-
Austin86250 replied to the thread Best Return Line Setup for Peterson CNC Caps? (1/4" vs 3/16" Hose).Alright, here’s what you need to do, swap the caps out he’s more than happy to work with changed orders, go for this cross over set up...
-
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.Pulls so much better than before very pleased. If your on the fence about hot rodding especially intercooling do it you will not regret it
-
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.This condensor fits 300x better than the stock one, and steel so you can weld brackets to it a lot easier highly recommend this if you...
-
-
Austin86250 replied to the thread Fuse box help!!!.2 screws under the driver side dash I’ll grab a picture later today
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.It is common to put the air filter in place of resivoirs keeping batteries in factory locations yes, I’d assume no modications will be...
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.Boost leaks found and fixed no complaints Here’s a little video for fun id call this project complete
-
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.Finally all buttoned up on this! For now Finished my intake and crank case vent Justin at r and d days VC sucks for a crank case vent...
-
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.088 is the same turbo as the 085 just different exhaust housings. Which I did so if he does the same as me it’s the same results
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.Yea can’t complain get 4k turbo kit results out of 800-1200$ of parts just alot of elbow great
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.Ran it up and down the mountains yesterday for a couple hours still checks out I’m giving it a clean bill of health
-
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.It would yes the ats 085.088.093 are all the same turbo, same cartridge same wheels, compressor housing is the same although 093 has a...
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.I’m going to call this project an extreme success, more power much smoother too, quieter in the cab, no more white smoke, wayyyy better...
-
Ats 085 compressor housing, compressor wheel new less than year old not a flaw to it works for 088 and 093 too Ats 085 air filter box...
-
-
Austin86250 replied to the thread 085 better spooling, zf5, and intercooled.Very happy with this here’s the final look need to finish the intake just mocked up and a few odds and ends but very very pleased
-
-
-
Loading…
-
Loading…
