So one of the things I found is that the rear leaf spring blocks I used are causing me a problem. I have a driveline vibration that gets worse when pulling hard. If you get back and look at the drive shaft and pinion, they are almost straight right now with no load. Throw in a little axle wrap and now the angle is backwards to what it should be. So I'm looking for replacement blocks with no taper to them.
As you can see, this block has a taper probably to correct the driveline angle on the super duty it was intended to lift.
These are the 250, 350, and superduty blocks together. I guess I need a stock style 350 block to correct the driveline angle.
What are you guys using as replacements? These were messed up because someone ran them with the u-bolts loose.
Thanks.
You must be registered for see images attach
As you can see, this block has a taper probably to correct the driveline angle on the super duty it was intended to lift.
You must be registered for see images attach
These are the 250, 350, and superduty blocks together. I guess I need a stock style 350 block to correct the driveline angle.
What are you guys using as replacements? These were messed up because someone ran them with the u-bolts loose.
Thanks.