Truck down TTB axle shaft needed

[NTOLERANCE]

My dad's 1992 f250 broke the left side axle shaft
He needs the inner and the outer shafts for the TTB
ASAP who can help

 

[jhenegh]

I scrapped some at Easter. Darn

I think laserjock is scrapping a D50 if I read his thread correctly.

These axles arent worth much and D60s are replacing them frequently. Used cheap parts should be around. Good luck!

 

[laserjock]

I've got one. Getting to it would be the hard part. It's currently stuck under my parts truck. I suspect shipping would be pricey to WI. There has got to be one much closer. Is that the driver side you need?

 

[NJGearhead666]

I have the driver and pass one with brand new splicer u joints in them. put a D60 in instead of fixing the D50 when I broke a shaft. But I don't know what shipping would be.

 

[NTOLERANCE]

Yes I do need the drivers side. I think that rolling it up an a sheet of card board and taping the crap out of the ends would suffice.

 

[leojr]

I've got a passenger side shaft (and the rest of a D50 I just removed) in Texas and can pull it and pack it tomorrow and have it heading your way Monday. If you give me your zip code I'll get the approximate freight to you. It may take 4 or 5 days unless you want to pay crazy shipping cots. I suspect the freight will be around $50. After you get the truck running you can pay me whatever you feel the parts are worth.

 

[NTOLERANCE]

Anyone think $100 shipped would be a good price?

 

[laserjock]

Where is it going to? Sorry Tapatalk won't show me where you are. I was figuring $40-50 plus shipping depending on how hard it was to get it apart.
Mine will be rusty. Leo's will probably be cleaner. Let me know tonight if you want to proceed, I'll dig into it in the morning.

 

[NTOLERANCE]

Madison wi.

 

[leojr]

Where is it going to? Sorry Tapatalk won't show me where you are. I was figuring $40-50 plus shipping depending on how hard it was to get it apart.
Mine will be rusty. Leo's will probably be cleaner. Let me know tonight if you want to proceed, I'll dig into it in the morning.

It's 3 pieces, the inner and outer couple/slid together and then the spindle shaft. I'm thinking $100 plus shipping, just the spindle shaft is almost $300 new.

Edited: I was looking at the right side which is 4 pieces. The left side comes out comparatively easy with just the spindle needing to come off. These have been sitting outside for a few weeks and I'm moving them up to storage in the morning.

You must be registered for see images attach

 

[laserjock]

It finally slacked off raining. If this is what you need and are interested pm me.

You must be registered for see images attach

 

[tbrumm]

http://madison.craigslist.org/pts/4610926677.html

Intolerance - here is a possibility for you if you have not found a shaft yet.