Ole BlackBetty
Latest activity Postings About
-
-
That is typically the problem in my experience with the E4Od, gotta scan the code as it is occurring or it clears itself. -
Ole BlackBetty replied to the thread E4od torque converter.i didnt get a code. i will have to check again when light starts flashing again
-
Ole BlackBetty replied to the thread Question installing Powermaster 9050.I just did mine recently, for top bolt I used my Harbor Frieght long extension, deep socket, and the woble joint that came with it...
-
That sounds like what I used as well. Basically, if you can install any other starter on these engines, you can install a Powermaster...
-
Ole BlackBetty replied to the thread 1994 starter.I used the swivel attachment that came in my harbor freight socket set , lol and a long extension
-
Ole BlackBetty replied to the thread E4OD Won't move.Anyone know what the outcome on this thread was?
-
Ole BlackBetty replied to the thread E4od torque converter.My problem is going into to fault mode OD light flashing and hard shifts, it seems to only do this by letting o. And off the throttle...
-
I believe you'll get a code if it slips too much
-
is there any way to tell if the torque converter is bad, or not locking up?
-
Ole BlackBetty replied to the thread Ball joints.Great info here, thank you Franklin2
-
I beg to differ with some of these guys saying this job is "easy". Yes, if you have done it several times, and have all the tools, it's...
-
If you minus off the cost of the shocks R&R and parts, the ball joint replacement cost seems fair to me. You can do the shocks yourself...
-
-
Yes you will.
-
What all are they including with doing the ball joints? Ball joints are 2-250 + 4-6 hours labor depending on what all it needs. Bearing...
-
-
Loading…
-
Loading…
