G.W BUFFALO
Full Access Member
Ok so i started my truck up before i left for work two hours ago. It's 45-50 degree's out, cycled the gp's twice and gave it half throttle. cranked at least 8 times, stopped and cycled the gp's again and now flat to the floor with the throttle it cranked 3 times before kicking over.. Now i am baffled, ive done it all and it still hates to start. New electric feul pump, lines, olives, return kit, matched injectors, beru gp's, gp controller. It has NO air intrusion, and runs perfect ounce it srarts.. Puff's alott of white smoke when it first starts, i think from cranking it so long and just a very light haze of white smoke while running.. Could this hard start problem still be caused by timing, or is there something else that could cause this, or maybe do i need to crank up the feul pressure a flat or two.. Please give me idea's, i feel it should only crank maybe 3-4 times before starting... Oh ya ounce it has a little heat in iit, it start's in 1 crank..... Thanks
Last edited: