Thread sizes?

[notenuftime]

Does anyone know the thread sizes of the two deleted sensors on either side of the fuel line? Plan on just capping

You must be registered for see images attach

them off.

 

[gnathv]

I believe they are 1/8 x 27 npt. The lower fitting in the picture is the shrader valve. Are you sure you want to plug that, it’s handy to bleed air from fuel system. Especially after a filter change.

 

[notenuftime]

I believe they are 1/8 x 27 npt. The lower fitting in the picture is the shrader valve. Are you sure you want to plug that, it’s handy to bleed air from fuel system. Especially after a filter change.

Yes you are right, won't plug that.
The other sensor I spotted dripping a little bit today, so I'll plug that.

 

[gnathv]

The shrader valve should have a cap on it, valve stem cap type.