Wheel/tire fitment question
- Thread starter cardana24
- Start date
bump.....I am still trying to figure out wheels and tires for my truck. I am thinking that I want 16x10 wheels but most of what I am finding are 16x8. The tires I have been looking at 35x12.50 I am not sure how well they would fit on an 8" rim, I am thinking they would look balooned out. Any more pictures or input is appreciated.
82F100SWB
Full Access Member
16x10's are very easy to come by, but a 12.50 on an 8" wheel isn't bad either...
I'm running my 44x18 Boggers on an 8.25" wheel... Mainly because I had them, and even that doesn't look bad.
But for 16x10's, have a look here: http://www.summitracing.com/search/.../Wheel-Bolt-Pattern/8-x-6-1-2-in/?Ns=Rank|Asc
I'm running my 44x18 Boggers on an 8.25" wheel... Mainly because I had them, and even that doesn't look bad.
But for 16x10's, have a look here: http://www.summitracing.com/search/.../Wheel-Bolt-Pattern/8-x-6-1-2-in/?Ns=Rank|Asc
that is the exact same search I did on their site last night, but thanks for the link. I curious to see how different size tires (285/75,305/70, 315/75, 33's and 35's) fit on differnt width wheels.
Diesel Max
93 F-250 4X4 - 7.3
For you guys that say you needed to move or cut your bumper with the 285-75R-16 ....... Are you running any kind of lift kit or add-a-leaf on the front of the vehicle ?? The reason I ask is because some members running these exact same tires say they didn't make any mods to the front bumper and others said they had to cut or move the front bumper out??? 
bigoilburner19
Registered User
x2 very bad ass
I just realized that my original post in this thread was incorrect: I had a 1.5" add a leaf in the front of my truck.
Csgod0
Registered User
Does anyone own a dually with aftermarked wheels? My 350 is hungry for 235's, and I'm looking at cheap-ish tires. I can't afford to go full Alcoa's, as I've spec'd them with tires to over $3k
my truck has 235's
Is anyone running a dually with 255 85 16's????
I think factory 4x4 dually wheels are different from 2wd factory dually wheels, like theres a larger space inbetween them on the rear axle
anyone know if the 255's would rub on the rear? when I get tires I want to try the 255's mentioned above
Is anyone running a dually with 255 85 16's????
I think factory 4x4 dually wheels are different from 2wd factory dually wheels, like theres a larger space inbetween them on the rear axle
anyone know if the 255's would rub on the rear? when I get tires I want to try the 255's mentioned above
Diesel_brad
Dunce
I had 255s on my 4wd superduty and they were close together. If the 2wd have less Backspacing than a 4wd they will touch
Csgod0 look up AMERICAN EAGLE wheels. they make Alcoa look alikes for about 140 a wheel, and youc an only run 4 not all 6
Diesel_brad
Dunce
285/75/16s on 16x8 wheels and a skyjacker add-a-leaf. No bumper trimming or cutting
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Diesel_brad
Dunce
97 F350 w 35/14.50/16.5s on a 16.5x9.75 wheel. No lift but 6" cut off bumper
You must be registered for see images attach
Diesel_brad
Dunce
^^^same 97 f350 but now has 2.5" ORU RSK and 315/75/16 on 16x10 wheels with NO cut bumper
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Diesel_brad
Dunce
1980 F350(TTB) w 97 body. 33/12.50/16.5 on 16.5x9.75 wheels. add-a-leafs front and back. 2" cut bumper(not really needed)
You must be registered for see images attach
You must be registered for see images attach
Diesel_brad
Dunce
^^^same truck but 35/14.50/16.5 on 16.5x9.76 wheels and 6" cut bumper(very much needed)
You must be registered for see images attach
