I tore it down today and the head is cracked the piston has been hamered on pretty bad. I'm now trying to get prices on the new parts to see what the plan is. The insurance agent saw me under the hood and came over to shoot the breeze ( the insurance office is next door to my shop). I told...
I dont know for sure if Im gonna sell her. If I do I will certainly let you know. There is no way it would make it to Hamilton but, That is easily solved I happen to have acess to several wreckers. I can throw it on a car carrier pretty easy. Im waiting on my buddy that works for the...
Thats the problem that I am wrestling with... I hate to get rid of something I cant replace. I hate to say this but I may have to start looking at powerstrokes or cummins. The parts for these motors are getting harder to find. When I redid the top end last year it took me a month to find a...
so since we have had 12 inches of white death on the ground here in the DFW area there are now huge puddles of water and large pot holes on the roads. Yesterday we were headed over to the inlaws house when I hit one of the said puddles/potholes and threw water up over the hood and windshield...
well I Guess thats what im looking at doing but it will have to wait until I get back from the trip I just dont have enough hours in the day to get it done.... I use lucas fuel treatment everytime i get fuel so im good on the additive i know that I got the money's worth out of the pump I just...
ok guys I changed out the fuel selector valve for the tanks last night and still no dice. The truck will not start if it is hot and you kill it and leave it for say 30 mins or so when you go to start it you will crank and crank on it and sometimes you get lucky sometimes not. I had another...
yeah the needle works for the rear tank just not the front tank. the injectors are probably stock i have had the truck two years and havent changed them same with the IP if they are stock then they have 227k miles on them I was leaning toward the IP but I was hoping for some other suggestions...
Ok heres the deal I have a brand new lift pump because it would only occasinaly be hard to start and you would have to crank on it for about 30 seconds to 1 min. to get the truck to start. It acted as if it was getting fuel so i replaced the obvious. i got the new lift pump in and now the...
The thing is with 2" spring spacers you probably wont be able to get the truck to align right due to the geometry of the front end being all jacked up. I hope you like my highly technical explanantion of that.... The most I could put on my truck was 1" spacers before it would not align...
the i beam bushings and radius armbushings ( the one tha goes toward the back)should have very little effect if any at all on the camber. the only way to align a truck with kingpins and twin I beam is to bend the I beams. I saw your in oklahoma I dont know exactly where you are of if a trip...
well I did nt see anything on the natoinal news about an Army guy going crazy and blowing up his Ford truck so is it safe to assume that it ran good enough to get it to the stealership to be timed...... if that is the case are you all good now?
Ramon
Sorry it took so long for me to get back too many irons in the fire right now. what i was saying is that the sensor port is where the water in fuel light plug goes you take the sensor out of the bottom piece on the OEM setup and screw it into the bottom so the dummy light still works. Both of...
if you need the sensor port you can use the wix #33617 or if you dont need it use wix #33417
I am running a baldwin filter right now but plan on switching over to the wix next filter change because the baldwin filters are a pain to get I have to drive all the wasy across town to a...
I know your in Ky but you need to remember that if it is not turboed there are laws against straight pipes. I know that in my county the jp court will hit you for about $700.00 in fines for the non turbo straight pipe. not saying i wouldnt do it but I also have a badge that gets me a little...
I had the generals pn my truck for about a year and could not stand them. they wore really weird in the middle it was very uneven. maybe I got a bad set I have heard other guys swear by them. good luck
Ramon
Yeah Baldwin is one of the major players here fo filters we run 5 International 4700 DTE trucks and one Frieghtliner with a Cummins and one Kenworth with a CAT motor in them and we use Baldwins they are good filters we have millions of miles ran through them
Ramon
they are the return line T's you can buythemas a kit at your local dealer or ata international dealer. I thinkthey are about 30.00 for the kit should come with O rings 2 for each injector and the T for each injector. I can't remember if the rubber line comes in it or not. when you put the O...
I have been having problems with my fuel filter leaking after about 3k miles. :puke: It always seems to leak on the bottom where the metal bowl with the drain valve and the water senor is. I started looking at other filters to see if someone has made a filter that does away with the metal...
My question is why would you want to go to the smaller motor what is wrong with your 7.3? I would think if your are looking at buying one they would be similar in price I havent priced them but that is my thinking. that is if the 7.3 wouldnt be cheaper since there are more of them around...
I know nobody mention this but I battled the scrader valve on my old 6.9 for a really long time it had the same symptoms as your truck and I threw money at the problem for months until i finally pulled the valve out and saw there was a tear in the rubber. I pulled a new valve out of a valve...
you need to make sure and replace the dryer and the orfice tube and make sure you get all the old freon and pag oil out/. I use brake cleaner and then blow it out from the dryer side it will come out on the end where the house conects to the back of the compressor. It usually takes about a can...
I was always concerned about the core support. everytime I have talked to someone about a body lift that is what I hear. is the fan will end up getting into the core support. how did you over come this problem or did you have this problem?
Ramon
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.