Need a throttle return spring

[Agnem]

Anybody have a spare pair of throttle return springs? These are the ones that are stuck together to look like one spring, and go from the high idle solenoid bracket to the throttle arm. I'm in need of one for a Moose Products client. Thanks.

 

[icanfixall]

Of course I have a spare. Just pay the shipping and call it even... Or you can send me a baby moose pump and call it even too... Actually I'm going "shopping" for things like this in a few minutes... I'll be looking ofr "things .....

 

[Agnem]

Sounds good Gary. I'll PM the address and pay the shipping. As for swapping for a pump, well... then I wouldn't need the spring would I?

 

[jjduedall]

I also have one you can have if for some reason you need another. let me know

 

[Agnem]

Good to know there are spares. Springs are such simple things, but getting just the right tension for X amount of travel is tricky.

 

[idi traveler]

does anybody have a picture of the springs installed. the PO of my 93 7.3 turbo has them zip tied to the oil fill spout, and I'm not sure where they should be.

 

[Greenie]

I'd like to see a photo as well.

 

[EMD_DRIVER]

Mel,

Just FYI.. I needed a set of return springs, while down in Bowling Green and found a spring assortment blister pack at their local Advance AP store. Worked like a charm!

 

[Todd C]

Here's a picture:

 

[idi traveler]

Thanks that helps a lot. I knew this was the place to be.......

 

[Brianedwardss]

I had to replace my throttle return spring and the spring for the C6 kick-down lever.. I took my old ones into a local farm store (True Value or Wilco) and matched them up, everything working good so far. And costs less than $2