LOGANSTANFORTH
Full Access Member
- Joined
- Sep 12, 2007
- Posts
- 99
- Reaction score
- 0
what is the width of it from wheel mounting surface to wheel mounting surface....
what diameter does the disk brakes and caliper take up.....
will a 16 inch wheel fit completely over the rotor and caliper or will they hit.....
what is the center pin to center pin width on the rearend.....
i am putting one under the rear of my 96 dodge ram pulling truck and i am having custom wheels built and i need the maximum back spacing allowable on the rear wheels.....im going to have the stock dually centers welded into new aftermarket 12 inch wide, 16 inch diameter rim shells....
what diameter does the disk brakes and caliper take up.....
will a 16 inch wheel fit completely over the rotor and caliper or will they hit.....
what is the center pin to center pin width on the rearend.....
i am putting one under the rear of my 96 dodge ram pulling truck and i am having custom wheels built and i need the maximum back spacing allowable on the rear wheels.....im going to have the stock dually centers welded into new aftermarket 12 inch wide, 16 inch diameter rim shells....
