Coolant reservoir full

My1500DollarTruck

Registered User
Joined
Sep 11, 2018
Posts
29
Reaction score
20
Location
Georgia
I have to say, the coolant was flowing before and after the high idle kicked off, so it wasn't cold.... just wasn't up to temp.

I have a new radiator, upper and lower hoses, and thermostat to put in. Should I just do that (since I have the stuff and was planning anyway) and see if that takes care of the problem?

I would agree with the others on isolate your current issue first and resolve, but I did exactly what you have parts for (radiator,thermostat,hoses, heater hoses). I flushed my system with distilled water several times (I believe I used 16 gallons total of distilled water in the drain/flush method). ( drain radiator/fill with distilled water, run it til hot(drive), repeat after cooled down). I did it till I was running just distilled water then did my parts replacements and filled with SCA anitfreeze.
 

Latest posts

Forum statistics

Threads
91,305
Posts
1,130,019
Members
24,115
Latest member
Tyler9828

Members online

Top