Banks Kit

[wildman7798]

Use Fed Ex ground - you'll save a few bucks. Just sayin'

 

[Ramzilla]

Use Fed Ex ground - you'll save a few bucks. Just sayin'

I agree. They have been cheapest in my experience.

 

[BIG GREEN 1991]

i would be interested in the turbo kit down here in fl though

 

[79jasper]

Still waiting to here back on shipping.

Let's say around a $100. Give or take.

 

[Ramzilla]

Sending PM now!

 

[79jasper]

Took the turbo off to inspect it for a prospective buyer, turns out it has some shaft play.
Not enough to touch the housing, but damn close.
Strange to me since it boosted great and sounded good. Now I wanna check the turbo on my 94 PSD to be on the safe side.

 

[towcat]

Took the turbo off to inspect it for a prospective buyer, turns out it has some shaft play.
Not enough to touch the housing, but damn close.
Strange to me since it boosted great and sounded good. Now I wanna check the turbo on my 94 PSD to be on the safe side.

there will always be some play. the shaft rides on a hydrodynamic "wedge" of oil.
as long as there is no collision with the housing, you are gtg. remember this is not a ball bearing turbo.

 

[cpdenton]

My banks kit has the same side to side play. End play and housing contact is what you don't want. I was worried about mine until I just decided to install it. Good boost here.

 

[Ramzilla]

Yeah side to side is normal. In and out is bad.

 

[79jasper]

That makes sense.
There is some in and out, but how much is too much?

 

[theSHERPA]

This is off a ZF. Will it bolt onto an e4od?

 

[FORDF250HDXLT]

This is off a ZF. Will it bolt onto an e4od?

yes.direct bolt over.my used banks sidewinder w/waste gate kit also came off a zf5 truck.