Search results

  1. Hyde

    This weekend its finally time

    I never did tear it down, I am very certain it was the water meth. If I were to do it over I would have kept it at one 525ml nozzle and coming in at 7psi or so instead of 4. The timing rattle when the meth came in was insane
  2. Hyde

    This weekend its finally time

    I thought this thread would have been long dead, @Steven Donald the governor spring was out of a Cadillac 5.7 diesel, about 4500 rpm. Wouldn't recommend without valve springs. A 6.2 Chevy spring should be a middle of the road increase. @03wr250f I'm still around :cheers:
  3. Hyde

    Selling "built" 85 F250

    Dammit! Shipping might kill
  4. Hyde

    Selling "built" 85 F250

    http://spokane.craigslist.org/cto/5097566648.html Selling my truck, build thread is in my sig. Have a Powerstroke now and it's been sitting long enough that it's just another project I'll probably never get back to at this point unfortunately. Would like $1000 without the intercooler, $1300...
  5. Hyde

    Introducing MOOSE BOOST!

    I'm curious to see the dyno results on this as well, hope you get to hit the rollers.
  6. Hyde

    NP205?

    Definitely needs its own crossmember! They are a heavy beast, I broke the extension housing off my T19 with a Borg Warner case, I wouldnt think it would last long with a 205
  7. Hyde

    Bullnose/Slantnose Diesel Picture Thread

    3rd gear burnout action Alligator Dyno
  8. Hyde

    This weekend its finally time

    Dont think I ever posted any pictures after I got the air/water intercooler on either, kinda a tight fit! Dont mind the wiring mess, Ive probably tripled the amount of wiring in this truck with all the gauges and gadgets.
  9. Hyde

    Question for you guys running Typ4 cams

    I have Comp 910s shimmed .030, that was with the stock cam but planning an R&D cam next time around
  10. Hyde

    This weekend its finally time

    Sorry guys havent been on in a bit. Funny you should mention the water/meth setup. I think thats what led to this engines demise. Havent torn down yet but fairly certain I either had a wrist pin fail or cracked a piston. I was running two Snow 625ml (are supposed to support roughly 400hp each)...
  11. Hyde

    Pheonix Friction

    Scary thing is I had to drive it about 150 miles home like that, can't believe it didn't make any noise
  12. Hyde

    Pheonix Friction

    Well went ahead and got it and put it in yesterday, thought I would share this though
  13. Hyde

    Any possible way to rig a blowoff valve on an idi?

    Better idea, micro switch that trips when the throttle returns to idle, also the BOV being open shouldn't cause it to not build boost, they have a very light spring that is supposed to open at the slightest amount of vacuum. Any boost should force it closed.
  14. Hyde

    Any possible way to rig a blowoff valve on an idi?

    Mine is an external wastegate. Just ran a quick thought for your BOV, run a normally closed say 1psi boost switch to control an inline valve on your vacuum source to the BOV. That way when you are on boost the valve will be closed, as soon as you hit 0psi the switch will close opening the...
  15. Hyde

    Pheonix Friction

    Didnt come up with my on my search. The time has come that I need a new clutch about a month ago. Im looking at their Stage 3 ceramic button clutch, its just over half the price of a the South Bend kevlar I had been looking at and about the only other non-organic clutch I have found. Any...
  16. Hyde

    after market tach?

    That tach has a very slow refresh rate, its intended for more of a fixed rpm application. I wired an Autometer diesel tach directly to the stator plug on my 3g alt and it works perfectly once you calibrate it.
  17. Hyde

    Your Front Axle....

    All of mine, 83, 84, 85 single cabs have had the D44HD. Cons, I can break axle joints at will. I do have a D50 in my mud truck, it has taken some serious abuse.
  18. Hyde

    HX35 + Banks Sidewinder parts?

    I removed the wastegate actuator from mine and welded it closed and run a 38mm external gate.
  19. Hyde

    look what ups brought me !

    Mmm I need one of those guys! Maybe in a slightly bigger version.
  20. Hyde

    This weekend its finally time

    According to the calculator I used to get torque from hp/rpm it has over 450lb ft across the board though!
  21. Hyde

    This weekend its finally time

    Just a used one off a 90 7.3
  22. Hyde

    This weekend its finally time

    260.7 peak on water/meth 219 on fuel, not as good as I hoped but not bad. I had trouble with the gov spring the night before, since it made peak power just before defuel I think it would have helped. It's also super advanced which didn't help, did the pump swap the night before the dyno. Have to...
  23. Hyde

    Searched but cant find my answer, Comp 910s

    Runs awesome, the water/meth has a very noticeable increase in power and spool up. I cant wait to hook a load to it and see how the egts are being intercooled now. But Im very happy, the increased boost is nice too :D
  24. Hyde

    Searched but cant find my answer, Comp 910s

    Thanks!
  25. Hyde

    Searched but cant find my answer, Comp 910s

    Didnt take many pictures, was on a tight timeframe

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,983
Members
24,111
Latest member
Lance

Members online

Total: 583 (members: 4, guests: 579)

Share this page

Top