Search results
-
E4od Change shift points?
Have you ever adjustes your FIPL? Or know what its voltage is at idle? Id try playing with that- Ferd_Diesel
- Post #26
- Forum: 6.9L IH & 7.3L IDI Diesels
-
E4od Change shift points?
Ive always had the exact oposite problem. When trans is at temp locks up converter at 35mph. to me felt to early and luged. learned how to work pedal better to make it better. I tried the FIPL in at many different volatages and that didnt change when it would lock converter. I always wanted a...- Ferd_Diesel
- Post #19
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Got rid of that nasty bumper and installed the one from a brick nose. When i went to install i forgot to take bumper ball off. Got it off but bumper doesnt sit right. Will fix tommorow. Had my bosses son helping me and knew he wanted to get out of there- Ferd_Diesel
- Post #43
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Building a better db2
Not sure how I missed out on this post when reading this thread monthes ago and a db2 uprade kit is an awesome idea. So mechanically inclined can upgrade there own pumps. I have like 4 stock pumps laying around. Cant say this enough love what your doing for the community- Ferd_Diesel
- Post #110
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Any insight? Tried installing factory air intake box. I never had one in my last truck didkt comenwith the kit. This came in the backseat of the truck. Tried mocking it up- Ferd_Diesel
- Post #41
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Got some work done today after work. Got the inner fenders fastened down. Rear filler next installed. Tank works good. Gauge works. Driver side negative battery cable insyalled and added body ground. Just need to get some new bed bolts. On a side note anyone know what thread pitch the studs are...- Ferd_Diesel
- Post #40
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Ditching the factory filter head
I dont want to i just want a clean setup- Ferd_Diesel
- Post #4
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Charged enough to get it primed back up. Ran it out of fuel- Ferd_Diesel
- Post #39
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Ditching the factory filter head
I took the fuel system I built for my 93 off it before I sold it and putting it on my 94 CC with some upgrades. Holley blue, regulator, check valve, gauge. My RCLB 93 only had rear tank sk I got rid of FSV mounted filter beads where the front tank used to live and ran all new lines. The crew cab...- Ferd_Diesel
- Thread
- Replies: 4
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
- Ferd_Diesel
- Post #36
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
I started working on my 08 bumper again. I stripped it down a couple of years ago to fix some dents. Lost ambition never primed it and it surface rusted bad. Knocked it all down and primed it. Picked up a bumper off a brick nose that's pretty straight. Driver side mount is tweaked but bumper...- Ferd_Diesel
- Post #35
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
I'll get a better picture of rims tommorow. I also clay barred and compounded the driver side of the truck and wow did it do wonders. I'll post pictures and videos tommtow. They are on my old phone. Still have to do passenger side.- Ferd_Diesel
- Post #34
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Been gone for a long time. Starting to get back on it. Really need a truck in my life. Missing out on money making opportunities and good deals. Since my last post I switched out my wheels from the 88 I had. Looking back i kinda like the old black ones better but I'm thinking that's becuase the...- Ferd_Diesel
- Post #34
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Electric pump setups
I mounted inside the frame rail to protect from frame rail and the day after I install it the driveshaft let go and hit the filters. Just dented them but took out the wiring going to the rear of the truck- Ferd_Diesel
- Post #11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Electric pump setups
I'll try and dig up pictures tommorow. I made mine out of 2 napa filter heads and filters. Piece of angle iron. (Mounted inside the frame rail, I had no front tank and wanted to protect from elements) 3/8 push lock line and fittings from the parker store(hydraulic supplier). A orielys fuel...- Ferd_Diesel
- Post #10
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
This was not full throttle- Ferd_Diesel
- Post #33
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
The block heater cord. It's not dragging just hanging low. Want to make a nice mount gate toeing it up and it hanging out the bumper- Ferd_Diesel
- Post #32
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Got the truck out together for the most part. Trans cooler in. I bypassed the radiator trans cooler and just used one in the grill. Been doing that for years. Boost gauge installed lower valnce and bumper installed. Finally looks like a truck. Did that last Saturday. Sunday I took it for its...- Ferd_Diesel
- Post #30
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Preorder Opportunity for CDD Intercooler Kits and 3" Downpipe Kits
Unless you want to take a basically brand new rd90 pump + cash for one of those intercooler kits- Ferd_Diesel
- Post #23
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Preorder Opportunity for CDD Intercooler Kits and 3" Downpipe Kits
Damn why does all this stuff happen when I dont have the money!!- Ferd_Diesel
- Post #22
- Forum: 6.9L IH & 7.3L IDI Diesels
-
Cracked E4OD 4X4 trans case from no front drive shaft ???
I never had an issue. When I fixed my flexplate I ended up swapping a lower mile updated trans in cause I literally got the call about it as the trans was coming down off truck. I let driveshaft hang and bumped into it knocking cap and needle bearings down. Never got around to hooking it back up...- Ferd_Diesel
- Post #12
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Should have a full day tommorow so I want to install latch, lower valance, bumper, put my fitting in intake hat for boost gauge, clean it, was all mud off underside and start fluid filming the underside.- Ferd_Diesel
- Post #27
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Took it for its first drive a few days ago. Just wanted to take it up the street and back. Lot of cops cause my works on the frontage road a mile from the substation but coast locked clear. Right after this video good flew open. Didn't have the springs on it yet so it came all the way back and...- Ferd_Diesel
- Post #26
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Been awhile since I posted got a little bit done since then. Got the trans cooler and hood springs in today. Door panels in. Dash put back together minus the column plastic. I might pull the dash shell out of my 93 before it leaves. A younger kid must have had this truck. I cut so much extra...- Ferd_Diesel
- Post #25
- Forum: 6.9L IH & 7.3L IDI Diesels
-
The Midwest Ferd Build
Picture the ole lady took when she dropped me some lunch off- Ferd_Diesel
- Post #24
- Forum: 6.9L IH & 7.3L IDI Diesels
