Search results

  1. I

    1ST Time It Left Me Stranded!!

    It is normal to be able to move the IP gear while it is in the housing. Or atleast it is on mine.
  2. I

    Fixed it, I think

    Thanks for the replies. The low battery thing makes sense because they were only reading like 11.7 volts before the new VR. Rob
  3. I

    Fixed it, I think

    So I found some info in an old post and did the full field test for my voltage regulator. Voltage only went from 11.75 to 12.43, bingo, found the problem. I took it back to auto zone and the guy tested it and confirmed that it was trash. I told him that they should have tested it before they...
  4. I

    electrical issues

    Can anyone tell me if the '83 had 2 different alternators available. I tried to look up the part # on auto zones site but it doesn't list the amps. I'm just wondering if there were 2 available, if I got the wrong one. Or would this not matter. thanks Rob.
  5. I

    How do I haul this motor without damage?

    The pan rails are 9 1/2" apart and from the back of the pan to the front of the pan is 26". You will have to remove the oil filter to be able to set it on your 2x12's. These engines are very top heavy, so like Darrin said get some good straps. Rob.
  6. I

    engine weight

    I bought a 2000 lb stand from Cummins tools and it held the weight with no problem. The hardware that came with it looked a bit shady, so I got grade 8 hardware for it. I only paid around $80 or $90 for it. I do advise being extremely careful when turning the engine. Hope this helps. Rob
  7. I

    electrical issues

    Sorry about that. I thought I had it figured out cookoo. I'll have to try and find another way to post the pics. The reason why I say the part must be factory is because it has a Ford emblem on it, but I cannot read the part number. thanks. Rob
  8. I

    electrical issues

    Thanks for the info tonkadoctor. I plan on getting the batteries load tested tomorrow. What you are saying makes sense. When I charge the batteries I can't get them to take more than 12.2-12.3 volts. Here are some pictures of the mystery part. It appears that is a factory part. Also I've...
  9. I

    electrical issues

    No, Mel I don't have a pic available yet. I gotta wait for the old lady to get home so she can show me how to post it. I thought the same thing at first but the way the plug is and the way the wires loomed up leads me to believe that it is factory. I'll get that pic on here asap so maybe you can...
  10. I

    electrical issues

    Well I have finally completed my head gasket change and got the ole rattler back in the truck. The 2nd day after I started driving it my voltage regulator burned up. I replaced it and everything was good for 2 weeks then my alternator went out. I replaced that and now my batteries won't charge...
  11. I

    Oil cooler ???

    Thanks for the knowledge Travis. I'll have to give it try in the am. thanks. Rob
  12. I

    Oil cooler ???

    Yes I am still working on this beast and have a question about the oil cooler. Is there a certain way that I'm supposed to take it apart? I already have it off of the block. I just was not sure if it just wiggled apart or what? Any advice would be greatly appreciated.
  13. I

    Score = Brotherhood 10 Docs 0

    That is great news Bill. Keep up the good fight!
  14. I

    Block weight?

    I knew I should have pulled the whole s**t in the first place. :idiot: :frustrate I've got everything off the top of the engine down to the block. The only things still attached are the front cover, water pump, and timing gear cover. Can anyone tell me how much the engine weighs now, without...
  15. I

    Is it worth it............................probably

    Yes Warden :draw I do have a strong attachment to my truck(like some of you do cookoo ). Thats what i really am leaning towards is buying the truck, yanking the engine, toolbox, and the solid rear glass(hate that damn slider) and parting out the rest. The only reason I will want to sell the GV...
  16. I

    Is it worth it............................probably

    :wtf: Nobody interested in a Gear Vendor?
  17. I

    Is it worth it............................probably

    hello to all those out there in IDI land. Wish I had an update for you on the headgasket change, but it has just been way to cold to get any work done. I was just wanting to get some opinions on a deal i was offered. My boss has a '85 f-250 dually(conversion i guess), 6.9, c-6, 4x4, lariat. The...
  18. I

    H.D. ford 5 speed

    Does anyone here know anything about ford transmission code W ? The only thing i could find said it was a hd 5 speed. My boss said it is called a K2. I have the chance to get one really cheap from him. :Sly Would it even work with a 6.9? It is currently in a 460 gasser. thanks. Rob
  19. I

    coolant check ball

    Does anyone here know where i can get a 1/4" stainless ball? Okie, I tried ace and they didn't have any. I called around to see how much a new housing would be, Napa, Oreillys, Auto zone, and a couple of small shops, didn't have it and couldn't get it. Car quest was $40 and 5 days, dealer was...
  20. I

    coolant check ball

    I got a chance to check it out today, no o-ring, no steel ball. :eek: When i look at the bottom of the housing i can see straight through to the upper neck area. Guess now i'll have to get me a new ball and try to work something out with a fuel line seal. (thank you James) I have a couple extras...
  21. I

    coolant check ball

    Thanks Okie. Just the answer i was looking for. I'll check it out and see what happens. rob
  22. I

    Stick that in your pipe and smoke it. Literally!

    Looks great Mel. :rock:
  23. I

    Acceptable timing ?

    Snap on is the most over rated, over priced tool company out there. Like you said their stuff doesn't last any longer than the "cheapo replace in a bind tools" rob
  24. I

    coolant check ball

    While getting all the engine pieces cleaned up and painted, i was checking out the bottom of the coolant neck and did not see the "coolant manifold check ball". Can I replace just the ball somehow? :confused: Or will I have to replace the whole neck? I am of the understanding that this little...
  25. I

    steel fuel lines.....important?

    so i don't need that steel line, cool. more $ for other stuff. i appreciate the info. thanks. rob

Latest posts

Forum statistics

Threads
91,352
Posts
1,130,885
Members
24,151
Latest member
JU57US

Members online

Total: 207 (members: 7, guests: 200)

Share this page

Top