Search results

  1. C

    Scheid Twins

    Can a set of their twins (HX35 and Schweitzer S4) be used with stock fueling on a 24v? Granted a boost fooler would be required, but is it feasible to do? I have the twins, just not the funds for anything else.
  2. C

    Intake gasket

    Anyone have a Cummins part number handy for one? I don't have the CPL handy, but its an 01....I don't think the intake horns have changed on the ISBs anyhow.
  3. C

    Fuel pressure senders

    Since I have decided to run a Holley red and new -8an lines from the tank to the filter and filter to the pump, I might as well use SS braided line for mechanical fp gauge. I have the autometer ultralite. What size hose is needed? It looks like 1/4" connection on the back of the gauge. Also...
  4. C

    Product Engineering Pump

    Whats the real skinny on this pump? I am looking for a "permanent" fueling system fix that will be reliable. I can't quite afford the FASS/Preperator at the moment. I see the 4200 model is set at 18psi. This is too much to subject the VP44 to for an extended period of time at startup, no? The...
  5. C

    Newbie

    Horace, good to have you aboard. Guess you are putting "feelers" out as far as knowledge on this board ;) Still liking Marco's ECM?
  6. C

    Basic upgrades

    As far as gauges, what else besides the basics would be cool to monitor? I have egt, boost, fp, trans, rear diff ( to be installed). I would think pre/post fp and egt can easily be done with one gauge, two sending units and a switch for each. I have a "new" custom console on the way with pleny...
  7. C

    Fuel pressure senders

    Big K, How exactly did you run your mechanical fp gauge...what fittings, lines, etc are needed? I have an 01 and was wondering how its done inside the cab. Do I need to replace the Schrader valve on the inlet of the VP with a tapped banjo? It seems like running a braided steel line up through...
  8. C

    Center floor console

    Well, after digging for sometime on the TDR, I found the post. Snowracer was kind enough to offer his console he made to me for just the cost of shipping! :D What a guy! Here is the thread. I have pics if anyone is intrested.
  9. C

    Center floor console

    Anyone remember the thread about the homemade center floor console. It replaced the cup holder and allowed things like a CB, gauges, switches, etc to be mounted. It was made out of plywood, I think. I am wanting to make something similar. I have too many things to mount and can't find suitable...
  10. C

    Code definitions

    Thanks RAF! That is exactly what I was looking for. I just want a list for future reference.
  11. C

    Code definitions

    Is there a list of ECM/PCM code definitions on the net? If I remember right they are in the service manual. The trouble is being a grad student, I can barely afford to :urinate let alone $95 for the book.
  12. C

    Painting side mirrors

    Stoked, any news?
  13. C

    HVAC Memorial Sticker

    Here Aaron: http://www.performancediesel.net/Web_Media/web_media.html
  14. C

    Painting side mirrors

    I saw another silver Dodge similar to mine with its side view mirror housings painted to match the body paint. Its James Silva's truck out in CA...looks real nice. :rock: I do not have his email, or I would ask him. I want to paint mine to match the rest of the truck to enhance the "sport" look...
  15. C

    "Old" DiPricols

    Anyone have a used set perhaps?
  16. C

    "Old" DiPricols

    Now that the new style ones are out, are there any of the old style ones still available? The white faced ones. I had some boost on my previous truck and sold it. I liked the look they have better than the new style. The Isspro marine EVs are similar, but I don't like them due to their having a...
  17. C

    tranny shifting problem

    Problem solved. FWIW, gentleman doing the work said if the problem keeps occuring, the wiring harness is the root problem. He said he has seen 3 CTDs with this problem and the harness was the cause in each case. Again, take it FWIW.
  18. C

    tranny shifting problem

    Having the solenoid and switch replaced in the morning. I'll let yall know how it goes. Thanks for the help fellas.
  19. C

    tranny shifting problem

    Having a problem when coming to a stop. The auto tranny will not downshift to first gear. It tries to start off in second gear. If I manually put it in first, all is well. Fluid level is fine. Its just annoying. Tranny is stock with 38k on it. Governor solenoid?
  20. C

    Cenpeco

    Any users?
  21. C

    New guy on board

    Lets see how little moderated this site will be, not like some out there... *cough* DTR *cough* :rolleyes: Looking forward to some good threads. Good to see some old names again.

Latest posts

Forum statistics

Threads
91,333
Posts
1,130,552
Members
24,137
Latest member
m2rtin

Members online

Total: 907 (members: 14, guests: 893)

Share this page

Top