Search results

  1. HankHill

    how does the horn pad come off, 92-97 interior

    my horn pad is broken, either going to fix stock horns or install a train horn setup so how does it come off, I have this vision of me yanking on it and a airbag blowing up in my face lol:rotflmao
  2. HankHill

    brakes problem again

    I need help with my brakes over christmas time, I replaced my wheel cylinders along with shoes, star adjusters, springs and rear brake line, brake pedal was okay for like a day then started to go low again, I bled the brakes maybe 50 times ran like 10 quarts of fluid through lines, but I...
  3. HankHill

    can a busted steering pump put load on engine?

    my PS pump is shot my steering wont come when he truck is started for about 2 minute and it also makes chirping/clicking noises and whines when you turn the wheel. I'll note the chirping/clicking clacking noise goes away if the truck is run for like 20 minutes I'm guessing the noise is...
  4. HankHill

    oil leak help please cant fix it

    So after I installed my electric fuel pump few months ago I didn't have a block off plate so I took the lift pump and ripped off the internals and kept the flange that has the bolt holes and welded to it and made my own blcok off, first time I jsut used rtv black, started leaking after, day ago...
  5. HankHill

    rusty cab fixing help

    So my driver and passenger side of the cab are rusty, I fixed the driver side this summer but the passenger side is getting bad its rusted through right under the door hinges and I don't really know how to go about fixing it any help please?
  6. HankHill

    replacing power steering pump help

    Hi, looking for any walk throughs, tips on replacing my trucks power steering pump, going to do it tomorrow and its going to be in single digits/negatives so really want it to go as easy as possible, im also replacing the power steering lines, also noted my truck is serpentine setup, will I need...
  7. HankHill

    anybody ever lift there bed off with cherry picker?

    is this a good idea? I don't have anyone to help me lift my flatbed off, I figured I'll chain four corners then lift it off the frame an inch and drive the truck out, my bed dimensions are 9.6'x8' could a cherry picker handle the bed, I can borrow one
  8. HankHill

    how to install cruise control on an IDI?

    I have a horn pad for the cruise with The buttons on it, what else would I need for setup? Is there any aftermarket?
  9. HankHill

    93' f350 4x4 low miles

    selling my truck, I ended up getting a 460 and love the truck, the duelly just sits now so I would like to get rid of it. 7.3l idi, 4x4 dually, 77k miles $4500 come and get it list of parts replaced in last 6 months both new gastanks, new differential cover, steering gear box, new...
  10. HankHill

    how warm is your truck in the morning when you use block heater

    how warm does your block heater make your truck in the morning? I had my truck plugged in overnight (probably overkill) and went and started it, truck needed high idle til it hit that temperature to shut it off, and didnt have heat right away, can these get tired or do they just die, mine was...
  11. HankHill

    brake pedal sensor busted

    So now my brakes are working somewhat my brake light wont come on until the pedal is pressed about 1/3 of its travel so most of the time while stopping it wont come on, not very good for suburban/ stop and go driving, can the sensor on the pedal wear out/ break? I looked underneith and see two...
  12. HankHill

    need help bench bleeding master cylinder

    I'm replacing the master cylinder on my truck, how can I bench bleed it? I bought it from advance auto, didnt come with one of those bleeding kit hoses. can I still bleed it without that? I went back to the store and the manager told me no body includes the self bleeder kits in their...
  13. HankHill

    help, need a picture of front 80-91 frame

    anyone have a picture of their 80-91 truck with the front bumper off? I need to see what the front of the frame looks like compared my 93-97 front of my frame which is boxed
  14. HankHill

    to everyone running oversized tires

    have a set of 36's I might buy, no wheels included, did you guys have to change the backspacing or offset of your wheels to fit your tires? I only have a general idea of what they mean cookoo not sure what measurement I should select for the new wheels I would hav to buy
  15. HankHill

    omaha standard bed for sale thats on my rig

    9.6' long by 8' wide, omaha standard dump flatbed. putting either a different flatbed or regular bed on my truck, only asking $600 its in good shape, boards too in upstate ny
  16. HankHill

    fan clutch making noise?

    When the truck is started cold I get a clicking noise coming from the fan clutch area, I think its the clutch slipping? once the truck is warm it goes away wont comeback until truck sits over night and is started cold
  17. HankHill

    can you replace battery terminal connectors?

    I cannot afford all new battery cables, is it possible to take off both of my + batt terminals on the cable and put new ones on? my grounds are fine but my hots are all chewed up so badly you could probably have it crack in your hand:eek:
  18. HankHill

    which spindle nut socket?

    I need to buy a spindle nut socket to pull my hubs, which one do I need 6 or 4 prong?? :dunno its a 1993 dana 60 balljoint axle
  19. HankHill

    where did you buy power steering lines and which ones?

    my lines keep leaking and Im fed up with it, I checked advance auto's website and they list about 500 for my truck so I have no idea which one to pick out, I know that my power steering system has the cooler that hangs off that piece down by the oil pan. and for those who are wondering, I did...
  20. HankHill

    anyone want a dually?

    Selling my truck to pay off another one, some info 1993, f350, 76k original miles, 7.3l diesel motor e4od automatic trans, 4x4 dana 60 front sterling 10.25 rear new gastanks, new differential cover, steering gear box, new international CDR valve, new driver side lockout, headlight...
  21. HankHill

    ticking sound seems like coming from valve cover

    I have a ticking noise its very fast at idle, it sounds like its coming from my driver side valve cover, what can I check for? also it sort of sounds like a metal on metal noise while driving and changes with rpms sort of nervous something will grenade in there If I dont check soon, I...
  22. HankHill

    lift basics & help

    So I have two spring packs with 3 leafs in each pack, each spring in the pack is about 5/16" thick and they are tapered, theyre fattest where the pin goes through. all together in the pack they are about 2 1/8" thick in the fattest taper part. would I need to put all three underneath the...
  23. HankHill

    picked up srw hubs and lift today

    drove an hour picked up two dana 60 hub+rotor assembly with bearings and races, and a 3" spring lift for only $140 pretty excited now I need to find two more 36" tires or a used set of four for cheap, I don't really want anything smaller than 33's. I'm not putting a scissor hoist on...
  24. HankHill

    bolt pattern for wheels will chevys work??

    I found some GM 8 lug 16.5x8 rims locally for real cheap to put some military tires on, will they work for our axles?
  25. HankHill

    pictures of dana 60 front hubs

    anyone have some pictures of their dana 60 front axles? I'm doing srw swap and dont know what the regular fronts look like without dually adapters

Latest posts

Forum statistics

Threads
91,334
Posts
1,130,563
Members
24,139
Latest member
440wagon

Members online

Total: 751 (members: 9, guests: 742)

Share this page

Top