Search results

  1. crazy4wdracer

    Wanted/NEEDED: Steering Column 92-97 F250

    My ignition is all jacked up..the lock cylinder is jammed and the key wont turn. I tried taking it apart to try to get the lock cylinder out and I broke the plastic push rod thing inside. How much would you want for one of the F250 columns?
  2. crazy4wdracer

    Wanted/NEEDED: Steering Column 92-97 F250

    I'm not too far from greensburg, would definitely drive there to get it. Is the non tilt one from a 92-93 F150 or 92-97 F250/350? and thanks Optikalillushun, that makes my search easier. I got one for free from a 94 f150 that had an airbag, the only connections that matched up...
  3. crazy4wdracer

    Wanted/NEEDED: Steering Column 92-97 F250

    I need a steering column for my 97 F250, manual trans. F150 column doesnt work. I need this ASAP. Thanks.
  4. crazy4wdracer

    Waste Motor Oil as fuel in a 7.3?

    Centrifuge would be a heck of alot cheaper than buying filters all the time I would think. I was looking into this a while ago and saw that you can get 55-60 GPH centrifuges for around $120. There are many semi's out there that filter the engine oil with a centrifuge. They did this in Diesel...
  5. crazy4wdracer

    87 F250 6.9 4spd 4x4 and 97 Powerstroke 5spd

    Yes I'm very close to Butler.
  6. crazy4wdracer

    87 F250 6.9 4spd 4x4 and 97 Powerstroke 5spd

    I'm about 30 miles north of Pittsburgh. My zip is 16023.
  7. crazy4wdracer

    87 F250 6.9 4spd 4x4 and 97 Powerstroke 5spd

    I'm sellin both my trucks because I need a reliable commuter car. Instead of typing everything I'll just post the links. IDI: http://pittsburgh.craigslist.org/cto/2120856572.html Powerstroke: http://pittsburgh.craigslist.org/cto/2116490920.html
  8. crazy4wdracer

    where to get bigger exhaust

    This is more expensive than what is necessary though. The tailpipe is $60 from NAPA and you will probably need about 4-5 feet of 4" pipe which is about $25, a 3-4 adapter (about $10) and a few band clamps and you're done. Doing it yourself is about $125 and a OBS PSD exhaust is about $300.
  9. crazy4wdracer

    turbo removal??

    I'm glad my 088 came off so easily. They are simple to take on/off once you get the hang of it you can have on off or on in about 10 minutes as long as they aren't rusted on.
  10. crazy4wdracer

    IDI VS early PSD

    I have a '97 PSD with 275K on it, nothing was done to the engine other than cam position sensor, which I replaced once and has been perfect since, and glow plugs. They really aren't much more complicated than IDI's. In my opinion the ONLY downfall to a early PSD is price of parts.
  11. crazy4wdracer

    Any place online to buy T04B center or parts?

    I'd kinda like to know the same thing. I too have an ATS 088 that could use a center section. It isn't hitting yet but isn't far off. These are very easy turbos to work on too.
  12. crazy4wdracer

    An offer to members

    If you could look up these two for me that would be great...One is mine and the other is my dad's truck. 3D7ML48C97G723131 1FTHF2615HNA31918 [email protected] Thanks so much!!!!
  13. crazy4wdracer

    buy a 6.9 diesel or not?? need to know

    I disagree (6.0's I agree though!). I have a '97 PSD it has 276K on it and the engine has never been touched other than glowplugs. I couldn't ask for a more reliable truck than it. They are pretty expensive to fix though espically compared to IDI's. Mine sure wasn't hard to work on but the...
  14. crazy4wdracer

    8 X 6.5 Lug Pattern ???

    That's what I was thinking too. Dodges still have 8x6.5 I'm pretty sure.
  15. crazy4wdracer

    High mileage powerstroke

    Ford needs to use that truck on a commercial!
  16. crazy4wdracer

    How to time after being rebuilt?

    Ok cool...and it's a 6.9 block.
  17. crazy4wdracer

    How to time after being rebuilt?

    I am looking into purchasing an engine that has been freshly rebuilt (still needs put partway back together). It's bored .030 over, new cam, crank turned down with new rod and main bearings, and new lifters. It looks pretty good and hopefully I can get it cheap. Now to my questions... 1...
  18. crazy4wdracer

    Black truck cold start

    It made a huge difference when I put new battery cables and terminals on my Powerstroke.
  19. crazy4wdracer

    Bolt pattern

    The 99-up bolt pattern is 8 on 170mm.
  20. crazy4wdracer

    My coolant gauge might be possessed

    This will be my next gauge for sure. They aren't expensive at all either. Around $10-15...
  21. crazy4wdracer

    banks ebay turbo

    Kinda seems like it. It's almost as much just for the turbo kit as I paid for my whole truck which came with a turbo!
  22. crazy4wdracer

    Wanted: Manual Trans Radiator

    Yeah I'm not sure...I tried looking up the weight for OEM ones but I couldn't find anything.
  23. crazy4wdracer

    Wanted: Manual Trans Radiator

    I saw that new aluminum ones are 33lbs so somewhere around there.
  24. crazy4wdracer

    Wanted: Manual Trans Radiator

    Can you PM me a price with shipping included. My ZIP is 16023. Thanks!
  25. crazy4wdracer

    Wanted: Manual Trans Radiator

    I am looking for a Radiator for my truck. I think the dimensions are (15 1/2 X 37"). If you have one let me know, I can pay with paypal. Thanks!

Latest posts

Forum statistics

Threads
91,344
Posts
1,130,706
Members
24,143
Latest member
Cv axle

Members online

Total: 225 (members: 3, guests: 222)

Share this page

Top