Search results

  1. typ4

    Plastic return line cap melted? How to prevent in the future.

    And this is why it has a fitting for an outlet on top so the pump is always full of fuel preferably bubble free.
  2. typ4

    Plastic return line cap melted? How to prevent in the future.

    This is exactly accurate. That's why it's called leak off it's what leaks past the machine parts.
  3. typ4

    Plastic return line cap melted? How to prevent in the future.

    Here is the facts to answer some questions. 1st- injectors are not cooled, the caps are there to capture the "leak off" fuel that gets past the pintle. 2nd- the only way that cap melts is if the injector pintle sticks open, combustion gas goes thru and melts the cap. 3rd-This can happen for...
  4. typ4

    94 ford factory turbo

    I have several upgrades over the stock rebuild kit for these turbos. And sometimes the housing and back plate are so worn out that a kit won't solve the problem
  5. typ4

    ATS 088 to 093 upgrade

    I just read through your entire post you probably would have been time and effort ahead to just order one of my oil line kits.
  6. typ4

    Injectors turbo vs nonturbo

    Also there's no need to upgrade injectors you just need a good operating set when you install a turbo. The injectors only move the amount of fuel that the pump is calibrated to put out. That said the BB code tips that I am using are very good so-called upgrade over the factory ones. They are...
  7. typ4

    Injectors turbo vs nonturbo

    If you want injectors from me order them and get in line they do not show out of stock I just build them to order because I cannot keep them on the shelf. It'***** or miss with accurate diesel but after looking at his shop on our road trip I wouldn't send anything there.
  8. typ4

    6.0 glow plug harness-- no fusible link?

    Keep an eye on that cheap 60 harness it will fail eventually. If you want a good replacement glow plug harness this is where you go. I helped him design this for quality and longevity with the proper wire and connectors. https://www.ididiesel.com/
  9. typ4

    What to do with this fuel filter?

    You definitely want to run a 30 micron on that primary filter. At least something bigger than the six I would not run the two because it's hard for the mechanical pull through it. Although you will know the moment it's plugged LOL
  10. typ4

    ATS 088 to 093 upgrade

    The ATS valve cover is only a single layer. When you get ready to modify that turbo keep me in mind LOL. I've been toying with the idea of putting a v band on both trucks at the outlet now that I see you've done that it's going to happen plus I have a 1 inch body lift so I have more room. Do...
  11. typ4

    Porting idi heads

    As Ive said before, these ports are huge and there is very little improvement to be made. Lower EGT's, thats the turbo doing its job.
  12. typ4

    Drive shaft length questions

    You can drive on your front end for ever if the oil stays it it.
  13. typ4

    INTAKE PAN/GASKET NEEDED.

    YES!!
  14. typ4

    INTAKE PAN/GASKET NEEDED.

    I talked to the owner of woodline company, these are going to be around for some time, they have 20 in stock, and over 50 in what he calls floating inventory. And they all get bent in shipping. PAI is venturing into the IDI market with more engine parts coming.
  15. typ4

    New injectors and pump. Exhaust smoking.

    Glad you turned it down. Clacky is normal on some engines. Old pump likely worn enough to be very retarded. Check timing again after a few miles. Lots of new parts go in the pumps when properly rebuilt. They are all a few percent over stock. Some like it some engines dont. Every setup is...
  16. typ4

    Who are our resident expert parts vendors?

    Just because you sell parts and proclaim yourself an EXPERT doesnt make it so. I have worked on these since they came out, I dont claim to be an expert, but ive been a full time diesel mechanic since 1976 https://russrepair.com/
  17. typ4

    Who are our resident expert parts vendors?

    I cant imagine the headache that would be. My website is enough.LOL
  18. typ4

    Does this wire go on the back of the Alt?

    Those are for the glow plugs
  19. typ4

    Thumbs up for 7lb radiator cap!

    I like this one...
  20. typ4

    Sad day and clutch (I thought...)

    It is a very common failure on the 4 spd bell.
  21. typ4

    Running new motor oil vs waste motor oil?

    I wouldnt run new oil, harder to light. and I saw less power.
  22. typ4

    Turbo seal kit and water pump

    All the bearings and seals made in china, no difference. And I have a website no phone number. https://russrepair.com/
  23. typ4

    Defective oil filter.

    3 filters does not make the whole company bad. i would their failure rate is in the 5% or less range. Now the QC might be the problem
  24. typ4

    Injectors not popping very well

    I replied to your inquiry the next day. '[email protected]' submitted the form from your 'Contact Us' page A user has submitted the contact form on your store. Here are their details: Full Name Russ Mathis <[email protected]> Thu, Jun 9, 5:54 AM (5 days ago)...
  25. typ4

    DIY Glow Plug Harness -> no "wait to start" light

    Here is your source for a Quality harness https://www.ididiesel.com/

Latest posts

Forum statistics

Threads
93,002
Posts
1,156,029
Members
26,597
Latest member
Jimacho

Members online

Total: 907 (members: 6, guests: 901)

Share this page

Top