Search results

  1. kbenz

    I like to set up a truck for regular towing what spec's should it have?

    zf5
  2. kbenz

    pump and injector cores?

    I got 2 if I can get 1 rebuilt
  3. kbenz

    starts then dies

    thanks, I'll try that. I was thinking it might be the inj pump. (It was actually just tap water)
  4. kbenz

    starts then dies

    wasn't really cold. tap water
  5. kbenz

    starts then dies

    93 7.3 non turbo. electric fuel pump. 6# fuel pressure after the filter. starts fine cold. hot it will start and run if you crank it soon after shutting down. If you wait 30 minutes it will start and stumble then die. Then it's a ***** to get going again. did the cold water on the ip with no...
  6. kbenz

    Holly Red Pressure test Question

    Holly's don't shut off
  7. kbenz

    clutch master?

    Thanks. Hyd is not one of my strong points
  8. kbenz

    clutch master?

    This is a totally different application than stock. I'll be using a wildwood master. Would it be better to go up or down an 1/8"?
  9. kbenz

    clutch master?

    What size bore for the zf-5 clutch master cylinder 3/4" or 1"
  10. kbenz

    another possible cab swap

    What size bore for the zf-5 clutch master cylinder 3/4" or 1"
  11. kbenz

    Something different

  12. kbenz

    Looking to build a custom turbo set up

    off subject but where did you find the aftermarket system?
  13. kbenz

    o rings?

    lower the number is softer?
  14. kbenz

    Finding the limits of my centrifuge and the sweet spot

    I run my oil hot. Like just before boiling point hot
  15. kbenz

    o rings?

    I found the 111 viton o rings but they come in 75a and 90a durometer? which one or does it matter? thanks
  16. kbenz

    swap question

    looking at a 89 model single wheel f350 4wd. how much would be involved in putting the 4wd front in a 93 model dual wheeled f350? Are the frames similar?
  17. kbenz

    Oil overfill ok?

    Send it
  18. kbenz

    Another fuel system overhaul thread...

    I ran both my returns to my wmo tank at first but if I ran any length of time on diesel I could watch my fuel gauge drop a little too fast for me. I ended up separating them
  19. kbenz

    another possible cab swap

    Got it home
  20. kbenz

    another possible cab swap

    I was brain fartin, for some reason I was thinking the c50
  21. kbenz

    another possible cab swap

    The ford drives great. Did a lot of work to the brakes and suspension, dual tanks and runs on WMO. I really don't like the cab that much. The stock gages are unreliable. list goes on.
  22. kbenz

    another possible cab swap

    Medium duty. f350 chassis. might put a service bed on it and make it a work truck
  23. kbenz

    88 Chevy 2500 6.9 IDI swap

    How are you making out on this project?
  24. kbenz

    another possible cab swap

    Thinking about pulling my 93 f350 crewcab off and mounting a 65 c50 on it. Anyone done one similar?
  25. kbenz

    I just noticed there are loads of cheap zd9 glowplugs on ebay

    I'd say fake looking at the crimp

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,942
Members
26,575
Latest member
Gerhard

Members online

Total: 1,568 (members: 3, guests: 1,565)

Share this page

Top