Recent content by wftree

  1. wftree

    99.5 F450 CC 4x4 6 speed

    I will post pics on monday when I get to my office
  2. wftree

    99.5 F450 CC 4x4 6 speed

    I am looking to sell my truck. It has 185,000 miles. New Ford reman engine at 140,000 miles. New clutch last summer. Gooseneck hitch Look at sig for more details $12,900
  3. wftree

    don't buy a Bri Mar Trailer

    The trailer is 5 years old. We sand blasted it and repainted it and you can easily tell that the steel is very low quality. This added to the bad design and the horrible paint job makes for a very lousy trailer. Just be warned, look very carefully before you but a Bri-mar and check out other...
  4. wftree

    don't buy a Bri Mar Trailer

    We were towing a 6,000lbs excavator on a 12,000 lbs Bri Mar deck over trailer. The tongue snapped off and dropped the deck onto the road. After looking at the design it is very poor. I am stuck with this pieces of crap and will need to weld significant reinforcements to get it back into service...
  5. wftree

    Exhaust Brake

    I got a banks brake exhaust brake is a little different from a "Jake" brake. I have thousands of miles and I use it ALL THE TIME. My truck weighs 11,400 em,pty and the trailer weighs 14,000 full. I have never had a problem and I do love having it. I do think $1200 is excessive for what you...
  6. wftree

    fan clutch and A/C

    Having mine replace as we speak 150,000 miles My fan only comes on while towing, it never comes on when I am empty. While towing mine would engage and disengage every 10 seconds when she got hot. Jus would not stay locked up. OEM $292 NAPA $272 Went with OEM
  7. wftree

    New Programming???

    Check with Jody Tipton DP tuner, I have heard good things
  8. wftree

    rims for 110 psi rated tires

    I think I need new rims, 16" I am putting on goodyear 235/85R16 14 ply tires 110 psi I think the standard rims are not enough to handle the high pressure. I can not find any rating stamped on the rims. WHere is a good source for rims for my dexter axles?? WFTREE
  9. wftree

    Bob Riley's Fuel system

    Been thinkin of adding a fuel system, I was leaning toward ITP's system but thought about Bob's also. I have bought a lot of stuff from Bob and have always been happy. Can anybody give me the dirt on Bob's system, how easy to install, performance etc. WFTREE
  10. wftree

    what do I risk with new injectors

    A guy is starting to build injectors and I wondered if I should be a guinnea pig. I think the guy is a very straight shooter and I have no doubt his intentions are honorable but I also just replaced my engine :puke: and I do not wnat to do it again. wftree
  11. wftree

    50hp with new engine! split or sigle shot injectors?

    Just dyno'd the new engine with a whopping 50HP increase. :thumbsup: with all the same mods 315rwhp 709ft/lbs torque that works out to $220.00 per HP. :puke: I think the next step is a fuel system then single shot injectors. going to look into Bob Rileys new system. What do you...
  12. wftree

    Ebpv

    Now you need a power elbow to open it up even more!!! WFTREE
  13. wftree

    Intercooler questions

    If you can find someone with a commercial account you can get a discount. WFTREE
  14. wftree

    Intercooler questions

    I saw about 100 degree drop. I am sure the taper core is betterand if I had the money I would buy one but I spent less than 300.00 for the 6.0 install WFTREE
  15. wftree

    Intercooler questions

    Below is the write up I did on the install any questions let me know. I have run 35 psi of boost from a long time with no problems. WFTREE With the EXPERT help of the guys from the Western New York Powerstroke Club, Thanks Gar, Jim, Jeff and Kory, I just finished the 6.0 intercooler...
See more

Latest posts

Forum statistics

Threads
91,336
Posts
1,130,572
Members
24,140
Latest member
placidoert

Members online

Total: 891 (members: 10, guests: 881)

Share this page

Top