Search results

  1. wftree

    99.5 F450 CC 4x4 6 speed

    I will post pics on monday when I get to my office
  2. wftree

    99.5 F450 CC 4x4 6 speed

    I am looking to sell my truck. It has 185,000 miles. New Ford reman engine at 140,000 miles. New clutch last summer. Gooseneck hitch Look at sig for more details $12,900
  3. wftree

    don't buy a Bri Mar Trailer

    The trailer is 5 years old. We sand blasted it and repainted it and you can easily tell that the steel is very low quality. This added to the bad design and the horrible paint job makes for a very lousy trailer. Just be warned, look very carefully before you but a Bri-mar and check out other...
  4. wftree

    don't buy a Bri Mar Trailer

    We were towing a 6,000lbs excavator on a 12,000 lbs Bri Mar deck over trailer. The tongue snapped off and dropped the deck onto the road. After looking at the design it is very poor. I am stuck with this pieces of crap and will need to weld significant reinforcements to get it back into service...
  5. wftree

    Exhaust Brake

    I got a banks brake exhaust brake is a little different from a "Jake" brake. I have thousands of miles and I use it ALL THE TIME. My truck weighs 11,400 em,pty and the trailer weighs 14,000 full. I have never had a problem and I do love having it. I do think $1200 is excessive for what you...
  6. wftree

    fan clutch and A/C

    Having mine replace as we speak 150,000 miles My fan only comes on while towing, it never comes on when I am empty. While towing mine would engage and disengage every 10 seconds when she got hot. Jus would not stay locked up. OEM $292 NAPA $272 Went with OEM
  7. wftree

    New Programming???

    Check with Jody Tipton DP tuner, I have heard good things
  8. wftree

    rims for 110 psi rated tires

    I think I need new rims, 16" I am putting on goodyear 235/85R16 14 ply tires 110 psi I think the standard rims are not enough to handle the high pressure. I can not find any rating stamped on the rims. WHere is a good source for rims for my dexter axles?? WFTREE
  9. wftree

    Bob Riley's Fuel system

    Been thinkin of adding a fuel system, I was leaning toward ITP's system but thought about Bob's also. I have bought a lot of stuff from Bob and have always been happy. Can anybody give me the dirt on Bob's system, how easy to install, performance etc. WFTREE
  10. wftree

    what do I risk with new injectors

    A guy is starting to build injectors and I wondered if I should be a guinnea pig. I think the guy is a very straight shooter and I have no doubt his intentions are honorable but I also just replaced my engine :puke: and I do not wnat to do it again. wftree
  11. wftree

    50hp with new engine! split or sigle shot injectors?

    Just dyno'd the new engine with a whopping 50HP increase. :thumbsup: with all the same mods 315rwhp 709ft/lbs torque that works out to $220.00 per HP. :puke: I think the next step is a fuel system then single shot injectors. going to look into Bob Rileys new system. What do you...
  12. wftree

    Ebpv

    Now you need a power elbow to open it up even more!!! WFTREE
  13. wftree

    Intercooler questions

    If you can find someone with a commercial account you can get a discount. WFTREE
  14. wftree

    Intercooler questions

    I saw about 100 degree drop. I am sure the taper core is betterand if I had the money I would buy one but I spent less than 300.00 for the 6.0 install WFTREE
  15. wftree

    Intercooler questions

    Below is the write up I did on the install any questions let me know. I have run 35 psi of boost from a long time with no problems. WFTREE With the EXPERT help of the guys from the Western New York Powerstroke Club, Thanks Gar, Jim, Jeff and Kory, I just finished the 6.0 intercooler...
  16. wftree

    Bombing a F450...

    Start with guages!!! read my signature. It all works very well together. Change the gears to 4.30 is my next step unless I can afford a USGear 2 speed WFTREE
  17. wftree

    ITP fuel system kit?

    Bob Riley (dieselsite)has a new one out. Most of his stuff is very nice so I think this will be also. I am waiting for someone to try it WFTREE
  18. wftree

    painting or coating intercooler pipes

    I thought of pollish but if Fords infinite wisdom the Wiring looms have worn some grooves in them. I thought Paint would do a better job covering up the imperfections
  19. wftree

    painting or coating intercooler pipes

    Sorry I know how it is when someone has an Idea you like, you just gotta do it. I think I will go with gloss black for the tubes, after I get the insulation off and also do the Tymar intake at the same time. WFTREE
  20. wftree

    painting or coating intercooler pipes

    What about ceramic coating. Someone on that other site recommended that. Is it something I can do myself. I am not sure what high temp paint is rated for??? WFTREE
  21. wftree

    painting or coating intercooler pipes

    I want to clean up the appearance of my motor. Thought of painting the intercooler tubes high gloss black, to match the re man engine, what kind of paint or coating would work best. Will I have to use High Temp paint??? WFTREE
  22. wftree

    Help Engine Light And Loss Of Power

    If you fill out your signature it helps us answer these questions. If you have a chip or 10K or other mods it may be due to over boost. The PCM will defuel at high boost levels, I run a blow off valve to prevent this. WFTREE
  23. wftree

    front u-joint/ axle loose

    I am not loosing a drop of Gear oil out that side of the axle, or anywhere else. and the U joint is brand new and tight. No Ford does not put on greasable ones. The hub functions fine. I guess it may be a trip to the shop. I will spend a little more time checking it out this weekend if I get...
  24. wftree

    front u-joint/ axle loose

    No the U-joint is tight it is the axle moving inside the housing toward the pumpkin????
  25. wftree

    front u-joint/ axle loose

    I was under my truck the other day adding some grease. When I went to grease the front passenger side u-joint it was loose. Not that is was worn out but I could move it up and down. It appears to be moving inside the axle housing? The drivers side is tight Any ideas why. WFTREE I hate...

Latest posts

Forum statistics

Threads
91,333
Posts
1,130,556
Members
24,137
Latest member
m2rtin

Members online

Total: 863 (members: 9, guests: 854)

Share this page

Top