Recent content by team_penin
-
T
Defueling?
Well I figured it out! The air filter looked like someone took it out and stuck it in mud then put it back in the truck---pretty simple right. He took it to have the oil change a couple of days ago and the guy said he changed the air filter, shows on the reciept :rolleyes: Go figure...went...- team_penin
- Post #11
- Forum: 7.3L Powerstroke Diesels
-
T
Defueling?
Ok...ther was no wierd noises, no SES light no nothing just defueld (lost power) at 2500 rpm. I am thinking MAP problem but was hoping someone has had this problem and would be able to shed som light as to what to check. This evening I am goin to check filters, oil, codes, fuel preassure and...- team_penin
- Post #5
- Forum: 7.3L Powerstroke Diesels
-
T
Defueling?
Wouldn't turbo stall make a noise of somekind?- team_penin
- Post #3
- Forum: 7.3L Powerstroke Diesels
-
T
Defueling?
2000 f-350,w/standard tranny and no mods(friends truck) He was pulling a pretty good load yesterday and about 2500 rpm it acted like it was defueling. Just lost all power in 4th gear. Could this be something with MAP sensor or somethin else- team_penin
- Thread
- Replies: 10
- Forum: 7.3L Powerstroke Diesels
-
T
Dirty Jobs
not real sure when it will be on again, you might check the Discovery channel website.- team_penin
- Post #3
- Forum: BioDiesel & Alternative Fuels
-
T
What to do about radio noise?
You can get a simple noise filter from radio shack, gets rid of the noise pretty well.- team_penin
- Post #4
- Forum: General, Performance, Upgrades & Accessories
-
T
Dirty Jobs
Anybody see the show dirty jobs on the Discovery Channel last night. They showed a guy making Bio Diesel from start to finish was pretty interesting.- team_penin
- Thread
- Replies: 7
- Forum: BioDiesel & Alternative Fuels
-
T
Gauge Instalation HELP!!
I put it on the intake on all of the trucks I install it on, I feel you get a better reading ther- team_penin
- Post #5
- Forum: 5.9L 24 valve Cummins
-
T
Gauge Instalation HELP!!
I would put the boost in the intake on the top of the motor. The pyro is pretty easy, just use lots of grease when drilling and tapping so you dont get metal shavings in the exhaust manifold.- team_penin
- Post #2
- Forum: 5.9L 24 valve Cummins
-
T
01 water in diesel light
I'll Check and reset any codes and see if that helps Thanks- team_penin
- Post #3
- Forum: 7.3L Powerstroke Diesels
-
T
01 water in diesel light
I have a friend that has an 01 f350. the water in fuel light stays on all the time. I have replaced the filter and drained the filter housing but the light is still on, any suggestions- team_penin
- Thread
- Replies: 7
- Forum: 7.3L Powerstroke Diesels
-
T
chip recomendation needed......
I second Jody, he is a great guy to work with. Good customer service!!- team_penin
- Post #11
- Forum: 7.3L Powerstroke Diesels
