Recent content by jdkline

  1. J

    Installed electric pump, now no start

    Thanks to everyone for their help. I got the truck started tonight, it took some doing, but at least I'm not having to buy a new injector pump. I was surprised at all teh air in there. I thought the e-pumps eiminated the concerns about air in the system, one of the big draws for me. Thanks...
  2. J

    Installed electric pump, now no start

    Hey guys. I spent 4 hours getting my electric pump installed. Wire to pump to switch to fuse to battery. Problem is, it didn't prime up at first and like an idiot I started the truck, cause I wasn't sure if it was running or not. The truck drained the fuel filter and then quit running. Worked...
  3. J

    Questions regarding re-wiring glow plug harness...

    All this sounds pretty complicated, mostly because youa re building a new harness. I ddi a similar conversion, I repeat my offer to help, Time, I think you have my email and phone #. The solid state controller, measures resistance in the glow plug and determines on time thusly. Your glowplugs...
  4. J

    Best way to remove 8' bed....

    It may be less flammable than gas, but you still don't want an open flame around it for too long. Once it hits it's flash pint it goes pretty good. Personally wouldn't thinka cutting torch on sealed fuel tanks would be an issue with a diesel, would not do it with a gasser though.
  5. J

    Engine install revisited

    [Ron, are you surer its leaking from teh heads and not teh valve covers or intake manifold? Head gasket failure is unusual in the 7.3s fromw hat I have read, are you overheating these motors or putting a lot of fuel in them? I'd leave it be and watch closely, when teh coolant starts leaking or...
  6. J

    Headstuds finally arrived (I have an extra set also)

    Scotty, you should ahng onto them. You'll definitely be able to help somebody out and get your money back to boot. Those things are nice,a nd we both know its just a matter of time before somebody else is doing head gaskets/turbo. Good luck with yours, J.D.
  7. J

    Ranger 2.3L cranks normally but no start

    Ok pulled the spark plug on the back passenger side. No spark, tried grounding it, still no spark. I also noticed that this particular plug was quite loose in the head. At this point, I'm wondering what's up. Even tried a shot of white death into the air intake, didn't even cough. Can smell...
  8. J

    Starter ?

    Is taht why the PSDs take so much longer to start than an IDI? Calvin, this info sounds just like what you said about the Nippon-Denso starters, are they and the PSD starter one and the same thing? I'm very happy with my Mistubishi starter, had it in about a year, and had some hard cranks in...
  9. J

    Ranger 2.3L cranks normally but no start

    Ok, what kind of fuel pump do these things have? No I had no stabilizer in teh fuel. Its not THAT old, only since right befoire thanksgiving(I think).
  10. J

    Need Ip Help Fast

    NJKen, you had a broken bolt take out an engine how? Why would it be such a big deal? I hadtwso of my original bolts pop out and the pump shaft snapped. The only time my truck has made em walk!
  11. J

    Ranger 2.3L cranks normally but no start

    Yep that's right on the 8 spark plugs Mel. I agree good little engine. Where is the distributor located at on this truck? Thanks,
  12. J

    Ranger 2.3L cranks normally but no start

    Hey, I finally got my ranger engine to turn over. As 95_Stroker and others suggested it was corroded connections causing the trouble. Now it won't fire! This truck ran great, it was my first vehicle and it was only parked because I enjoy driving my IDI more. It started immediately even...
  13. J

    Hey, need help finding new IP return line elbow

    Tim, they might know what I mean with that part #. There is another IH dealership in the area, actually one in Orlando and one in Jacksonville, but they are both owned by the same people as the one I go to in Ocala. But thanks for the part#, in any case this will help with IH. They can't do...
  14. J

    Hey, need help finding new IP return line elbow

    Well you guys were right on. My hard start is coming from air leaks into the injector pump at the return line. I am using a rednecked elbow at this time and this is probably the cause of the leak. Is there anywhere iI can get a new elbow? IH was no help, the just gave me a bunch of crap that...
  15. J

    Hard Start Cold

    The consensus here seemed to be that it is probably air intrusion, so I have decided to pursue that line of attack...this morning I went to bleed the schrader valve...guess what, lots of air and no fuel at all. Cranked until I had fuel. Gonna go for a start in about 30 minutes to go to work...
See more

Latest posts

Forum statistics

Threads
91,324
Posts
1,130,379
Members
24,132
Latest member
Nanohawk

Members online

Total: 601 (members: 10, guests: 591)

Share this page

Top