Recent content by DowneyB

  1. DowneyB

    No Fuel to Injectors

    Alright, just so I don't leave this unfinished: It must have been something in the injection pump. I still don't know what it was, but it would not put fuel to the injectors. I swapped it out with a pump from an engine that threw a rod a little over a year ago. (I don't really have a good...
  2. DowneyB

    No Fuel to Injectors

    The overnight thing is why I'm so confused. I got down to maybe 5 degrees that night. But it got up to above freezing the next two days and I still couldn't get anything out of it. I suspected gelling, so I put a heat gun on the IP and let it sit there for 15-20 minutes so the whole thing was...
  3. DowneyB

    No Fuel to Injectors

    Long time lurker, but I finally have a problem I cannot figure out. I drove my truck last Tuesday evening, started and ran fine even though it was like 10 degrees out. Wednesday morning, same temperature, it will not start. I have determined over the last two evenings that when I crack...
  4. DowneyB

    Intermittent misfire on 7.3

    I'll be honest, I have no idea how many miles are on this engine. Its a 1990 7.3 (I think) and I've put probably at least 80k on it since I've owned it. It was in an '86 f250 I bought when I was 17 (around 2003 or so), and when that truck fell apart I took it out (like 5 years ago) and put it...
  5. DowneyB

    Intermittent misfire on 7.3

    I have a 7.3 that kinda "popped" one morning when I started it to leave for work, and its had a very subtle miss since then. I've had this motor for years and it is kinda worn out but its always ran without a hiccup until now. It does use a fair amount of oil. The miss is almost...
  6. DowneyB

    1985 f250 parts in Kansas

    Hey, I've got this up on craigslist right now. Prefer not to ship anything big... https://kansascity.craigslist.org/pts/4651417168.html Thanks! Brock
  7. DowneyB

    IDI get together in the MidWest!!!

    I am a student until June at K-State in Manhattan, KS. After that I will have the time and possibly the finances to make a trip like this. If this happens this year and I can't come, I will be looking forward to an annual event. :thumbsup: The hardest thing would be to convince my wife, and...
  8. DowneyB

    Fuel heater plug leaking

    That would be a relief. I couldn't figure out how it came apart earlier, and I don't have the internet at home. :thanks:
  9. DowneyB

    Fuel heater plug leaking

    Hey, I gotta question: The fuel heater plug on my fuel filter is leaking fuel when the truck is running. Is there a way to replace just the plug in the head or do I need a new fuel filter head? Thanks, Brock
  10. DowneyB

    Engine/trans acting up

    My parents have a 1994 E350, and I borrowed it last weekend and noticed that it was acting weird. The engine is idling high, and the transmission shifts hard in all gears, including reverse. I think the two may be related, but I am rather unfamiliar with the setup. Oh, it has a 5.8L and an...
  11. DowneyB

    angled clutch master

    Hmmm. There are holes in my firewall that allow me put either one in there. Of course, the intelligent me ran wires through some of them, so without a lot of redoing, I'm limited to the angled ones. The MC I have has had no problems sitting at a 20 degree angle, though. I'll report back if...
  12. DowneyB

    Dumb question re: flywheel diagnosis

    I have had that happen once. It was after it had sat for about a month pointed uphill as I worked on something. I think what happened is something leaked down on it and got in it and caused it to slip. After about a week of light driving, it had disappeared and hasn't come back since. I...
  13. DowneyB

    Post Pics Of Your IDI

    Here's mine. I think it falls mostly under the stock classification, even though someone before me put in a 7.3. The first is back at the farm, before I left for college. The second is at college, shell for storage only. The third is the most recent picture I have, from a weekend when...
  14. DowneyB

    rear end locked up and I need help!

    I had that happen to the drivers side of my truck once. The end result of it all was that it had to be cut off with a torch. I think I had the nut off though, just the bearings were cut.
  15. DowneyB

    CL diesel van

    My brother was poking around and found this on craigslist. http://kansascity.craigslist.org/cto/1077818830.html This is really cool to me, as I plan on having a decent sized family, but I don't yet, (I don't get married until July) and I can't afford it now... so sometime in the future I...
See more

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,040
Members
24,117
Latest member
olsen726

Members online

Total: 813 (members: 9, guests: 804)

Share this page

Top