Recent content by Cucamongan

  1. Cucamongan

    Did the 60's Ford truck ever come in 4 door?

    Found a '66 that's supposedly an original crew cab... NEVERMIND! Sorry for bringing this back from the dead......
  2. Cucamongan

    parking brake

    I had good luck buying them from NAPA, just telling 'em what year, cab and bed length... perfect fit.
  3. Cucamongan

    87 crew cab rear door window regulators.

    So, you want to make your 2 rear doors power windows, instead of the manual cranks? my '91 has power windows in front and manual crank windows in the back.
  4. Cucamongan

    Need help/ideas on removing side trim - Anybody having the same problems as me?

    I bit the bullet and bought the 3M trim eraser. It worked great on removing the adhesive padding part, but it removed the chalky old paint. oh well, paint was always on the list of things to do... I doesn't help the previous owner probably mudded the truck and then never washed the mud off to...
  5. Cucamongan

    Need help/ideas on removing side trim - Anybody having the same problems as me?

    Ugg, a little pricey at over $40. Or am I too cheap?? How long do they last for? Can I do a crew cab or will I have to buy 2? And for a crazy-hair-brained idea, will they polish headlights? Or should I try the other 3M product #'s 07498, 07499, 07501, 07502 or 07517... nevermind...
  6. Cucamongan

    Need help/ideas on removing side trim - Anybody having the same problems as me?

    Im trying to remove some 23 year old side trim, since it was getting old, peeling in some places and the previous owner put a few sheet metal screws in it to hold it back on... :backoff Anyways, I have pulled most of it off, but am trying to get the adhesive. I have tried a few goo-gone...
  7. Cucamongan

    I might have an E4OD problem?

    After reading a few threads, I realize I have a lot to learn about these E4ODs.... BUT, my problem is when accelerating from a stop at normal 1/2 throttle, the truck accelerates kinda slow, until it gets to about 1,900-2,000 RPM then it picks up and then shifts at around 2,300-2,400 RPM. It...
  8. Cucamongan

    IDI Bronco FS

    about $500 to 800 too high, but sure COULD be a nice rig.... I like it for the fact that is a 4 door Bronco with a IDI Diesel and 4x4
  9. Cucamongan

    Wow this is a nice buy check it out

    Let us know how your new project goes! :sly
  10. Cucamongan

    Loose or leaking powersteering resivior?

    so is it cheaper to buy the oil filter or the O-ring?
  11. Cucamongan

    Found out why it has a Death Shake! now what to do?

    Towcat, you have a PM I got the grinder out and went to town. not pretty underneath.... porosity in the crap welds crack was pretty big.
  12. Cucamongan

    Found out why it has a Death Shake! now what to do?

    Here is the repair receipt:
  13. Cucamongan

    Found out why it has a Death Shake! now what to do?

    More pictures of the frame, not looking good.... what to do?
  14. Cucamongan

    Found out why it has a Death Shake! now what to do?

    It was bought from a family friend, who only owned it for 6 months, who sold it to us for what he had into it, by pressure from his wife. We drove it for about 9 months to a year until a death shake would appear and rattle your teeth loose once in a while (once every 2 weeks) until it got more...
  15. Cucamongan

    Found out why it has a Death Shake! now what to do?

    I knew i came to the right forum. Thanks for all the fast replies. and now, Gary has given his opinion. we can close this up now! I have taken some welding classes and spent quite a few hours welding, so i had gotten confirmation from Gary that it needs to be ground down and started over...
See more

Latest posts

Forum statistics

Threads
91,292
Posts
1,129,831
Members
24,106
Latest member
lewisstevey7

Members online

Total: 596 (members: 4, guests: 592)

Share this page

Top