-
-
u2slow replied to the thread DRW to SRW Pros cons discussion.Fwiw, the width of the axle and tire sturdiness/capacity plays a part on stability. I went to #3860 tires first, then to a 5" wider... -
u2slow replied to the thread Powerstroke 2 IDI no Turbo conversion.The HEUI injection can become a nightmare as they get on in life. Not simply electrical know-how will get you by. I unloaded both my...
-
u2slow replied to the thread Powerstroke 2 IDI no Turbo conversion.The powersroke is going to be a headache. You'd need all the computer/wiring stuff from the excursion - probably best with transmission...
-
@divemaster5734 I can definitely tell you that the powerstroke adapter plate is completely different than the IDI plate. You can use...
-
There is a spring down underneath with the equalizer bar, it may be missing. that happened on the motorhome (the equalizer broke...
-
u2slow replied to the thread '89 F350 - ABS junk system and safety inspections.Falsified gvwr? Thats weird. We always have the choice to license gvw below the mfr gvwr, so long as it's no less than 1.5x the curb...
-
u2slow replied to the thread DRW to SRW Pros cons discussion.Since it is a flat deck, keep the dually diff and run SRW wheels. My E350 cutaway van was like that, factory.
-
u2slow replied to the thread Sterling 10.25 oil leak.I would re-use the bearing unless its shot. If one is bad, I'd renew both at the same time.
-
u2slow replied to the thread Sterling 10.25 oil leak.Whenever changing a pinion seal on a crush-sleeve diff, i make sure I have a a crush sleeve eliminator to go on at the same time.
-
u2slow replied to the thread SMF Clutch kit.I'd be inclined to run some thicker/better oil in the ZF5. Maybe overfill thru the shifter opening (like us dodge getrag guys have to.)...
-
u2slow replied to the thread SMF Clutch kit.I did SMF on my powerstroke (also ZF5-s42) and never noticed a growl. The DMF was making a racket and didnt want to risk it letting go...
-
u2slow replied to the thread SMF Clutch kit.I reckon 'Perfection' amounts to a rockauto house brand; reboxed clutch made by somebody else. Compare pictures with other brands. The...
-
u2slow replied to the thread Forward facing car seat.Don't the 92-97 rear belts lock when you pull them out all the way? Can you update to that style?
-
u2slow replied to the thread Highboy Axle Swap.The old small inner bearing/journal did get phased out. The Dana 61 from the 80's-on and 60 from mid-90's-on use the traditional dana...
-
u2slow replied to the thread Clutch hitting safety switch.The switch gets to be a problem when the pedal linkage is worn out. I nearly had my leg pinched off between two trucks 25 years ago...
-
-
Loading…
-
Loading…
