Recent content by 410slayer

  1. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    finished truck back in business thanks for all that have helped out.also changed the oil in the HPOP.engine oil,new filter.
  2. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    between the hpop and the two bolt flange or on the outlet side.the expanded view i got from the dealership i cant tell.
  3. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    finally had to brake down and buy the oil hose, racing season is here.replaced the hose and ends.but back to the high pressure fuel return,where i broke it off at the two bolt flange.the threads are in the the brass nut.so i cut it off and now i there is not enough room to turn the flaring tool...
  4. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    ok i got the braided line off pin hole leak,what was the special removal tool?it came off with a 3/4 open end wrench.well i hope international has this hose.the local ford dealer want $153.00 its a 12 inch braided hose? the only weird thing is it has different ends.thanks again.
  5. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    thanks to all iam at work but will get outside its warm tonight(26F) in the next hour and try and remove the hpop hose from the pump to the head the ford dealer said $153.00 for one hose and $137.00 for other.i figure i should change both but one is definitely blown.i run sprint cars and the...
  6. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    PLEASE HELP.blown braiden line going to head from hpop well working in 15 degree weather outside i found the line leaking heavily.so is this holding out the glow plug sequence?this is where i was thinking the ipr was stuck.this a great safety feature to save my engine.ie no oil pressure at...
  7. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    i just ordered a fuel press.relief housing from dieselorings.com.i cant test fire till i fix the broken one.can i make my own block off plate will the truck drive with this blocked off?i would like to drive truck home before the parts come getting sick of working on truck at work.i did the high...
  8. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    fuse 30 is not blown.and yes the low press.transfer fuel pump turns on and is pumping when the key is on.i busted of the fitting on the return for the fuel bowl.so i must find a new part it looks like cheap white metal.
  9. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    yes there is a wait to start light,iam back at work so i will check fuse 30 fuel heater.and unplug if blown fuse.
  10. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    thanks bigrigtech yes the tach bounces up to about 300 up and down while cranking and no white smoke i have had it in a heated bldg.and did not smell a thing.and the scanner did not have a capability for cranking speed or i could not find that option.but i mean its not even trying to start i...
  11. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    follow up after scan with snap-on tm 2500. hello here are the codes p1393glow plug circuit low inputbank 2 (LT).p13911(1.)p1000system check incomplete.p0603 internal control mod kam error.my friend that let me use the scanner said $600.00 to do the change out the glowplugs,he told me the side...
  12. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    no start hello i checked the hpop level its about 3/4 from top,i pulled fuse #9 and changed out the crank positioning sensor,i think that what is called a pointer with a sensor on the crank passenger side bottom.i cleaned all the battery posts and i screwed up i think when i unhooked the...
  13. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    thanks for all the responses my guys at work think cam positioning sensor?due to the fact that it ran 5 minutes like mormal before stalling out.i will check the hpop level and the oil level to be safe.when i pull the fuel filter cover it is full.thanks again.
  14. 4

    2000 7.3 f350 PSD broke down at work.in the front of main door.SUCKS!!!!

    hello bought truck last sept.ran great until today sat a week in 20 degree weather started right up idled 15 minutes.drove to work 35 miles 3 am started the truck to warm up for drive home truck was idling so i went back into plant 15 minutes later i go outside and the truck is dead.i went thru...

Forum statistics

Threads
91,327
Posts
1,130,413
Members
24,133
Latest member
Nanohawk
Top