-
-
Clb replied to the thread Does the way this previous owner hooked up the boost gauge work?.Pretty much the same, ugly? Perhaps. The gauge is suspect, try feeding it regulated psi, 5-10psi observe the gauge. -
Clb reacted to jwalterus's post in the thread Tap size + cleaning threads + steering zerk with
Like.
1/4-28 thread (generic US grease zerk), tapered on the zerk so it seals tight rather than bottoming out They're probably metric zerks... -
Clb replied to the thread Underhood vacum.This needs admission to the tech 101 files...
-
Thanks, Super helpful!:hail
-
In case it's relevant for anyone here is Nick Pisca's diagram for the vac. manifold ports...
-
Clb replied to the thread Underhood vacum.Looks like as close as I can see.... From the vacuum pump to the vacuum tree, to the reservoir, to the servo, thru the servo to the dash...
-
-
Clb replied to the thread Underhood vacum.Whatch driveing? Put the trucks specs in your sig line so we can see it up front. I have an 88 and 93 fsv to reference..
-
Clb replied to the thread Tap size + cleaning threads + steering zerk.Your biggest problem is that the tin cap on the rod end is thin. It's probably an 3/16-28 ( you have 28 pitch lt= lubrication thread)...
-
Clb replied to the thread Should I buy this truck?.True But as it has sat for a while, I would fill the cylinders with secret sauce and ley em sit. I always advocate for loading one down...
-
Clb replied to the thread Should I buy this truck?.Good start... I can't tow something home for 2k
-
Diesel with a manual trans and turbo... $1200 wouldnt bother me at all. Even at $1500
-
Clb reacted to ArminTamzarian's post in the thread 7.3 idi injection pump leaking from advance piston. with Like.
I tried but can't find any signature option. I am not sure what I am doing wrong.
-
Clb replied to the thread 7.3 idi injection pump leaking from advance piston..On the home screen, before you look for new media.... Tap your avatar, name,handle, Poke around the listed items, look for Account...
-
Clb replied to the thread 7.3 idi injection pump leaking from advance piston..Fill in the trucks specs in your sig line so we can quickly see what you've asked about. Then Hit the stickies and tech 101 section of...
-
-
-
Loading…
-
Loading…
