Truck just stalls.........PSD

chach3835

DIESEL BURNER HERE
Joined
Sep 27, 2007
Posts
136
Reaction score
0
Location
Wauseon/Toledo
I am going to go look at a truck that is a 2000 CC 4x4 with 170k mi xlt PSD, the guy said he had it warming up one day this past week and went inside. When he came back out the truck was not running. He went to start it up and did but then just plain stalled. I might have the option of buying it like this. He said he was going to take it to the shop and find out what it was. OK my question is, could it be fuel pump? or what could it be :dunno. HE was asking 7800 for the truck. What would it be worth with it running like this?
 

Mike

Stroker
Joined
Mar 24, 2004
Posts
12,389
Reaction score
17
Location
Cora
Could be CPS
Could be UVCH fried
Could be IDM
Could be shorted fuel heater
Could be fuel filter
Could be fuel pump
Could be out of fuel
Could be.....................
 

OLDBULL8

Good Morning Ya'll.
Joined
Feb 12, 2009
Posts
9,923
Reaction score
342
Location
Delphos , Ohio
First thing I'd do is change the CPS. It's on the pass side, next to the damper, takes 10mm socket. If you have an IH truck dealer near you, get one from them, the black one, last price for me was 17 bucs in Lima. I carry a spare in the glove box.
 

93turbo_animal

Registered User
Joined
Jan 12, 2005
Posts
2,293
Reaction score
0
Location
Marengo,Ohio
Could be CPS
Could be UVCH fried
Could be IDM
Could be shorted fuel heater
Could be fuel filter
Could be fuel pump
Could be out of fuel
Could be.....................

in the same order

take oil cap off see if it smells like burnt wiring
not sure how to check this one out side of swapping it out
I doubt because it shouldn't have started back up again but you just gotta check the fuse.
take lid off see if filter is full check fuel preasure with shcrader valve on the side of fuel bowl.
see above
see above
and more yet to come
 

chach3835

DIESEL BURNER HERE
Joined
Sep 27, 2007
Posts
136
Reaction score
0
Location
Wauseon/Toledo
OK guys I talked to the guy he says it will start and run then just shut off. I am going to go look at the truck Friday. HE said he just towed a car from Maryland about two weeks ago and she has sit since and he has never had any issued before with the truck. This sould not keep me from purchasing the truck correct? Would you guys rate this low on the terms of concerns? I don't have the truck here but willing to buy from him the way it is if I feel I can fix her with minimal problem.
 

OLDBULL8

Good Morning Ya'll.
Joined
Feb 12, 2009
Posts
9,923
Reaction score
342
Location
Delphos , Ohio
The UVCH will give you the same problems like your experiencing. Mine came loose on the drivers side only a 1/16" inch under the cover. You have to take the valve covers off to check them. The CEL will come on and go back off during running, but it will set a code if you can pull the codes.
 
Top