just a little update, not so happy.
so here i am, all butt hurt.
the crank has a .010" end play, but thats not what im concerned about.
main journals look ok, i took 3 of the caps off, and this is the worst i found.
rod bolts detorqued at 65 ft/lbs
main caps detorqued at 95 ft/lbs.
You must be registered for see images attach
but its the rod bearings im scared of.
You must be registered for see images attach
You must be registered for see images attach
rod journals dont look bad either, a few visible lines, but nothing that remotely caught a fingernail.
another rod bearing....
again the rod journal looks ok.
You must be registered for see images attach
so, what would you do? im still waiting on a sizeable check, but no telling when that will come in.
with burning man right around the corner, i will most likely not see it for a few months or so...
would you spend the time changing just the rod bearings?
or would you pull the crank and do em' all?
im looking at this engine like this.....
You must be registered for see images attach