ROCK HARVEY
Full Access Member
I just got a cheap nippon-denso style one from Rockauto. It’s been good so far. I’m really surprised that the casting on the powermaster doesn’t give enough room to get a socket on. I replaced that top bolt with a stud when I did my starter, that way you can hang the starter on the stud while you work. You could maybe make the stud a little shorter as well to give you some clearance to get the socket and nut on. I would stick a magnet in the socket to hold the nut inside while you fish for the stud. Good luck, and I’m sorry this is turning into an unexpected nightmare.