Search results

  1. gsxjay

    96 PSD swap

    Iv got a complete 96 PSD with 4wd zf5 I have all the wording to swap it in to an obs 198 thousand miles oil cooler needs orings was gonna swap it in to a super duty with that said iv also got almost all wireing to swap it in to a 99 and up SD I'd like 1600 or I'd do a partial trade for a 7.3idi...
  2. gsxjay

    7.3 psd

    Iv got a complete 96 PSD with all the wireing to do a swap in an obs as well as all the little parts needed for the swap engine has 189 thou on it oil cooler needs orings that is it no tuner ever installed iv also got all the wireing to install thin engine in a Superduty so iv got what you...
  3. gsxjay

    Superduty axle

    I have a 01 SD axle I believe it's a 50 all the linkage is the bigger of the two e99 has smaller diameter linkage has 410 gears and its complete also with this sale I will include all the Superduty leafs and front spring hangers came out of a diesel with 36 inch tires may be lift springs I am...
  4. gsxjay

    na rods

    ok i am gearing up for my idi to 01 superduty build an iv gotn a 92 7.3 na what is the limit on rods and is it worth the hassel to find turbo rods. now what i expest from the truck 300rwhp 400 would be fn fantastic but i dont see that but iv sourced a craigslist s400 turbo ip injectors and cam i...
  5. gsxjay

    tail gate and bumper

    I've got a brand new tail gate for a 86 style ford bought from ford not a jap repop and an obs bumper the kind with the openings in the center very nice shape best offer on each if out of state you set up shipping again tailgate never used and bumper real nice
  6. gsxjay

    sd powered idi

    OK quick question are the frame towers different from an idi to a PSD gearing up for my idi swap in to my 01 SD and found the SD towers are the same from gas to diesel and an obs PSD will bolt in to a SD so if an idi will use PSD towers then my swap just got easy
  7. gsxjay

    what gives

    ok had issues with 97 psd got her running great now a week later back to know start lots of smoke coming out the pipe while cranking new starter fuses good and dosent try to start not even a stumble just smokes and no fire even under either again wtf :mad:
  8. gsxjay

    still no start

    iv tried everything first lift pump went out put a new one on got fuel now cranks over fine i notice a bit of smoke when i try to start it which leads me to think injectors are firing ? but dosent even try to start even with either only thing left is an oil change but can that really make it...
  9. gsxjay

    e 99 questions

    i see tons of people stating early or late 99 model i have a 99 whats the difference between the two iv searched but no answers
  10. gsxjay

    new ps owner

    ok its probably been answered plenty of rimes but in my search iv found nothing i just got a 97 f250 with the 7.3 ran fantastic then just died while driving now the po had just put a cps on it the month b4 so i dont think that should have went again so i renderd the gp inoperable and shot it...
  11. gsxjay

    superduty idi?

    i have a 7.3 idi factory turbo motor and an 01 v10 super douche i know someone has had to of done this swap as it seems easy so if theres a thread or know some one i have a few questions i was going to cummins the truck but would rather stay ih and a ps swap seems counter productive due to...
  12. gsxjay

    super duty axles obo

    i have a set of 02 f250 sd axles 80,000 miles complete minus calipers and rotors in good shape drove great 1000 obo located in ohio middle ohio to be exact may do partial trade for a nice 22 rifle or 1911 perfer an ohio member cause i dont want to mess with shipping but if you set it up i will...
  13. gsxjay

    stearling 10.25

    i have a complete rear axle out of a 95 f250 i just put 3.73 gears wheel seals bearings new brake shoes drums are ruff but didnt pulsate has sway bar put your youlk on and go open to offers 567 215 6237 text is preferred
  14. gsxjay

    c list turbo for sale cheep

    http://cleveland.craigslist.org/pts/3292473088.html figured some one on here may want her
  15. gsxjay

    pyro issues

    i have had a glow shift pyro in my truck and have them in my mustang without any issue well now my pyro is acting funniy works as it should under normal driving but when i mat it it goes crazy then starts to read correctly my question is could it be the egt probe if so does any one know if it...
  16. gsxjay

    us gear info

    well my plans for a zf swap fell through long story my truck has a new e4od with a us gear hi lo between the trans and transfer case now i want to remove it ha i have no use for it and a member on here wanted the trans and hi lo but i have to use the trans now but id imagine that he still wants...
  17. gsxjay

    window compatibality

    quick question will :dunno:dunno:dunno:dunno windows that were manual bolt to the power track the glass that is
  18. gsxjay

    fuel sender help

    well i dropd the side tank in my 94 idi and the inlet an out let were rusted that when i tryd to remove the lines they snapped off so where can i get a new sender also i saw we can use the strokes senders whats involved with that conversion and where can you get them at cant find them any where...
  19. gsxjay

    injectors

    ok i plan on putting my new bb codes in tomorrow and was wondering what i should watch out foe when i start this an what are the common issues and fixes 4 these issues are just dont want any suprises when i do this and also i want to do the gps also but cant get zd9s around here but a few...
  20. gsxjay

    glow plug push button question

    as title states i no its on here some where but i cant seem to find it could some one please link me to a wright up on wiring the glow plugs to a push button
  21. gsxjay

    got a question

    First i read on here a few people got an adjustable clutch rod from napa does any one have a part number cause my napa has no clue what i want and secondly i have two trucks a 94 idit srw and a 89 idi drw what rear axle options came in these trucks and how do you tell what one you have thanks...
  22. gsxjay

    need some info on egts

    ok fellow burners i just did an entire brake up date lines everything an put my new gauges in now i put the new pyro probe in the passenger mannie and my concern is when i get on it i can get the temp up to 1150 an just touch 1200 be fore i let off now my trucks pump isnt turn up any is...
  23. gsxjay

    got a question

    ok i just finished my gauge install with the exception of the furl pressure sensor. now on the filter head where the line does to the ip just to the right of it there is a one wire sensor what is that sensor an could i tee in to that port for my pressure sensor. secondly i am acquiring the...
  24. gsxjay

    quick question

    i am installing a fuel pressure gauge in my truck and i am curious as to where the best place would be to put the sender for the gauge between lift pump and filter or between filter and injection pump which is where i think it should go so i would know if the ip is starving but just wanted...
  25. gsxjay

    gauges

    not sure if this has been askd but i realy like the looks of the programers/tuners but since our trucks are mechanical does any one if any one make a lcd display that resembles a programer/ tuner that i can get so i dont have gauges every where. id rather just loo at a screen and be able to...

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,975
Members
24,110
Latest member
Lance

Members online

Total: 788 (members: 9, guests: 779)

Share this page

Top