Search results

  1. B

    '12 VW TDIs

    Well, we ended up buying one. So far 37K and enjoying every mile. Summertime highway mpg averages around 50 mpg depending on driving habits and speed. Wintertime average is more like low 40s and the overall average we see is about 44-45 mpgs with pretty good power. We have the 6-speed...
  2. B

    Clutch time

    I don't believe so, but suppose it could be. It is a small but steady leak that has been there for years. Not sure if it is leaking enough to cause that.
  3. B

    Clutch time

    $1k is labor and parts with conversion to SMF. OIL is what's leaking. Thanks
  4. B

    Clutch time

    Well I'm afraid it might finally be time for a new clutch. It has been shuddering a little for the past 20K or so, but it's finally starting to get worse to the point where I don't fully trust it. I won't be doing the work, but have a transmission shop next town over. They quoted about $1000...
  5. B

    10W-30 OK over the summer?

    Hey, I ended up not driving my truck much over the winter and only have about 500 miles on the Rotella T5 10W-30 semi-syn that I use over the winter months. Is it OK to keep this oil in over the summer since I don't have many miles on it or should I change it out for 15W-40 that I normally...
  6. B

    Manual > Automatic MPG's

    We just got a 2013 TDI with the 6 speed manual. With 3K on the car now we are seeing about 42-45 mpg tank average. Highway mpg 46-48 mpg, in town 40-42 mpg. Should be even better once it is broken in. We have hit 50 mpg highway on the level and going the speed limit. This is on a Sport...
  7. B

    Hurricane Sandy My Experience

    Sorry to hear how the storm has really affected you. I work for a power company here, but the damage we had wasn't anything like you had down there. Have patience, in time things will get better. I wish you the best of luck.
  8. B

    Ebay find

    My 90 F250 XL super cab has the cloth front captains chairs and a vinyl rear bench seat.
  9. B

    Tool for 5/16" IP bolts

    Well it sounds like I wasn't the only fool asking around for a 16-point socket.LOL Actually, I was able to loosen up the 3 9/16" nuts with just a regular wrench, but it was kind of a battle.
  10. B

    Tool for 5/16" IP bolts

    Correct I got the 16 pt socket idea from the injection servicing article. I'll get the 12 pt one instead, no wonder it was so hard to find! Thanks all for the help.
  11. B

    Tool for 5/16" IP bolts

    So what do you all use to remove the 3 bolts holding the IP to the timing gear? I can't find a 16-point socket or wrench anywhere local so far. Tried the local Napa, Sears, Lowes, Fastenal, and the typical response I got was they didn't really know a 16-point tool existed. Any idea where you...
  12. B

    Any help with IP in Maine/New Hampshire?

    Are there any members in the ME/NH area who would be willing to help me install and time an IP? I'd be willing to pay someone who knows what they are doing. Having trouble finding a diesel shop in the area that still knows how to time these old IDIs. Had a shop install a Uhaul IP and now the...
  13. B

    Another new guy intro

    Well you joined the right forum for your new truck, welcome. But do you have any pics?
  14. B

    Replaced injectors, now engine has knock

    Well after reading icanfixall's post and reading Mel's article a couple more times I think I will attempt to replace the pump. The removal and installation sounds more straightforward now but the aligning up or timing afterwards is what I am not sure about. So the slight knock my engine...
  15. B

    Replaced injectors, now engine has knock

    I could use some good advice here. Today I replaced my injectors that were original with 162K on them along with return lines, caps, o-rings. I did not replace the pump yet which is original also with 162K. I do have a replacement U-haul pump I'm just not convinced I can do it myself. So...
  16. B

    Best Shocks?

    and we have sh!t for what they call roads here in Maine!
  17. B

    Best Shocks?

    Have the Bilsteins in only the front of my truck and love them. Gabriels in the back. I'd never by another shock. Got mine from shockwarehouse.com.
  18. B

    '12 VW TDIs

    I have been looking at the new VW TDIs in the Sportwagen model and wanted to know if anybody had any experience or insight into the newer TDIs?? Have found some stuff concerning the HPFP (high pressure fuel pump) failure on some, but it seems most are fine. However, the new pump is a $7000...
  19. B

    Rough Ride

    Try some Bilstein shocks, they helped my F250 alot.
  20. B

    Interesting find

    I don't have the window sticker. Mine is a 90 F-250 XL 4x4 with captains chairs and center console, am-fm-cassette, cruise, towing mirrors. I do have the owners manual and 7.3 diesel supplement it came with.
  21. B

    Glow plugs replaced

    It took me about 4 hours to do in between Christmas shopping. I have no idea what it takes most as it was my first time :angel:. But I went slow and vacummed real good around each one and also spent some time cleaning off some crud near the back of the engine. The #2 plug was the hardest to...
  22. B

    Glow plugs replaced

    Brad S - I paid $9.49/ZD9 at Diesel Filters Online. Ididriver - Yes, it's like night and day having new glow plugs installed. I need some battery cables as well. Was thinking of going to Tractor Supply for some.
  23. B

    Glow plugs replaced

    So I replaced my glow plugs this weekend and installed 8 new Motorcraft/Berus. I started spraying them down with Deep Creep at least a week ago. After pulling the first one and finding it was a Champion :puke: I thought: Oh Shit I'm in trouble here. Well I ended up removing all 8 of the...
  24. B

    2nd gear ZF

    Thanks for all the help guys, I guess I'll try to just get moving in first and then ease her into second and see if that helps. Also, is replacing the 2nd gear synchros even possible, cheap, or easy??
  25. B

    2nd gear ZF

    Just curious does anyone else find 2nd gear shifts harder than all other gears in the ZF? Mine has always shifted a little hard even with synthetic ATF into 2nd but fine in all others. Not overly hard, but definitely noticeable. Or could this be related to my original dual mass that has been...

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,788
Members
24,099
Latest member
IDIBronco86

Members online

Total: 742 (members: 9, guests: 733)

Share this page

Top