Search results

  1. 7

    new homie bumper! =)

    I tjink ima run to tsc. They have some 22000 lb d ringl. The ones on it now are 11000 but yeah thety look pretty dinky. I thought about storage in the bumper bit the way.i.uave it deaigned underneath is apmost impossible
  2. 7

    new homie bumper! =)

    Oh and i put a leveling kit under the front and it set the camber waaaaaaay off. Puttin the bumpeer on helped a lot still too much positive though. And i thought about a vice just dunno yet.
  3. 7

    new homie bumper! =)

    Thanks guys unfortunately i had no plans jotted down i made the mounts and built the whole thing by precise guestimation. Haha. Still gotta finish the headlight guards and the whole grille guard is bolted down in case i gotta pull the cam er somethin. And yeah i need bigger d rings. I just had...
  4. 7

    cold air intake ideas?

    Not a fan of cowl inducton. Lol goin for sound and function
  5. 7

    new homie bumper! =)

    Just got bored one sunday and had a full sheet of 3/8" plate steel layin around. 6, 3/4" bolts holdin it on and weighs in around 250 300 lbs. it has footholds between the d rings and liscense plate now also. still gotta go the headlight guards. comments? improvements?
  6. 7

    Official 2012 rally

    Well bein my ol rig is the only ride i got, sad thing is i cant teust it to drive that far haha. Ol things seen better days and money is an issue. As with many many people.
  7. 7

    cold air intake ideas?

    Its similar to the ghost tube is my idea. Make a collar to fit at the intake and run a 5inch rubber 90 degree elbow off a junk frwightpiner classic and run 5 inch and reduce it to 4 inch and a k&n. 5" for intake sound if anyone wonders why so big not for better air flow
  8. 7

    cold air intake ideas?

    Ive got a pretty good idea on how i want to make my intake but id like to see some of yalls ideas to compare with mine to improve. Bring on the pics.yall!
  9. 7

    Fuel trim screw A.K.A. torque screw

    like i say right now its sorta a play truck/daily driver. and i keep it on the low in the city so i dont git in trouble. even though its more fun that way!
  10. 7

    Tips to help keep my egt down without takin the smoke away?

    it was already 4 to7 degrees retarded when i got the truck ran horrible with white smoke all over the place. so in truth its between 5 and 8
  11. 7

    Tips to help keep my egt down without takin the smoke away?

    hahaha. yeah i keep it to where no one is really lookin except the guy behind me. in the middlw of the city a big nono. but yeahi get what yer say ing
  12. 7

    Tips to help keep my egt down without takin the smoke away?

    thats the point piss off the guy behind you hahaha er else mine would be cut back. i aint worried about no tree huggers ima blow as much smoke as i can till we git emissions test around here hahaha
  13. 7

    Fuel trim screw A.K.A. torque screw

    yeah. right now its a play toy/daily driver. once i get home and start towin again ime set it all back down to just above stock so nothin burns up lol. and yeah the idi n/a is definately the lack of air. plenty of fuel to shove just the air needs to be more plentiful. and im not slappin a turbo...
  14. 7

    Exhaust leak or Valve tick?

    yeah while it was running i just went nice and slow with em kinda hard cuz i had to feel for the click but after i shut it down i double checked em and the checked out
  15. 7

    Rear wheel bearings

    nah got one even easier. take a welder and run a FAST bead around the inside of the race. DONT let it penetrate. the race will flat fall out. just be really careful with that kind of thing shouldnt even have to beat on it once the bead is run
  16. 7

    Exhaust leak or Valve tick?

    hahaha nah never had any trouble with em since i started workin on engines
  17. 7

    Exhaust leak or Valve tick?

    haha nah. i tightened to bout10 ft-lbs before starting i made sure that wouldnt happen hahaha. ive always done non adjustable rockers this way dont know why just always have
  18. 7

    Fuel trim screw A.K.A. torque screw

    and the new verdict is.......................no noticeable change
  19. 7

    Fuel trim screw A.K.A. torque screw

    went almost all the way out with it and nothing maybe its my imagination. be back in a few ima go test this puppy!!!! BAHAHAHA
  20. 7

    Fuel trim screw A.K.A. torque screw

    That i do believe is the one if i havent completely gone insane yet
  21. 7

    Fuel trim screw A.K.A. torque screw

    ive backed the damn thing near all the way out and nothin. and nice pic othern the text in the way lol and i havent been inside my pump dont really want to lol afraid of what i may find
  22. 7

    Fuel trim screw A.K.A. torque screw

    if fiddled with mine but i havent seen any difference in smoke at take off or various rpms. no difference at all would i have to turn down the internal screw to see an effect?
  23. 7

    tilt wheel in my 89

    well hey what better way to learn?
  24. 7

    tilt wheel in my 89

    indeed, thats them. pain in the A$$ little boogers to git to but itll save ya a lot of money if you can replace em yerself
  25. 7

    Exhaust leak or Valve tick?

    installed snug. started it up and torqued while running. havent seen any trouble out of any yet

Latest posts

Forum statistics

Threads
91,305
Posts
1,130,019
Members
24,115
Latest member
Tyler9828

Members online

Total: 566 (members: 5, guests: 561)

Share this page

Top