crash-harris
Breaker! Breaker!
Please show everyone your center and overhead consoles! Those that don't have them may want them! Those that do have then may want one like yours! Show off you Centurion or other custom manufactured consoles, your handmade/homebrew consoles, and if you have a console you nabbed from something else, show us that too!
There has been a lot of talk since I've joined the OB about interior consoles and questions on how to make them and dimensions. I've personally had a few people interested, so maybe a console thread is a good idea. It would not only benefit the lot of us to have custom console information, but also to know what else fits (like Bronco consoles for example, or whatever else works). Thanks for the idea @chillman88
So please post pictures and measurements and share the cup holders and switches!
Here's mine...
Manufacturer: Western Hauler with my personal fixes/improvements.
Type: Center console and half-length overhead console.
Material: Wood, acrylic sheeting, aluminum diamond plate.
Truck: Enterprise D, 1990, Ford, CCLB, dually, currently 2wd.
Inserting as thumbnails.
The overhead first. This originally had a compact CB set in an acrylic surround in the top hole and maybe an acrylic switch panel in the bottom hole? It was gutted when I bought the truck.
Dimensions:
Overall length - 35.25"
Overall width - 8.5"
Overall height - 5.25" (at tallest point)
Yes, the fullsize CB on the bottom obstructs the rear view mirror. I'm short so relocating it down the windshield is in the plans.
Center console in next post.
There has been a lot of talk since I've joined the OB about interior consoles and questions on how to make them and dimensions. I've personally had a few people interested, so maybe a console thread is a good idea. It would not only benefit the lot of us to have custom console information, but also to know what else fits (like Bronco consoles for example, or whatever else works). Thanks for the idea @chillman88
So please post pictures and measurements and share the cup holders and switches!
Here's mine...
Manufacturer: Western Hauler with my personal fixes/improvements.
Type: Center console and half-length overhead console.
Material: Wood, acrylic sheeting, aluminum diamond plate.
Truck: Enterprise D, 1990, Ford, CCLB, dually, currently 2wd.
Inserting as thumbnails.
The overhead first. This originally had a compact CB set in an acrylic surround in the top hole and maybe an acrylic switch panel in the bottom hole? It was gutted when I bought the truck.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Dimensions:
Overall length - 35.25"
Overall width - 8.5"
Overall height - 5.25" (at tallest point)
Yes, the fullsize CB on the bottom obstructs the rear view mirror. I'm short so relocating it down the windshield is in the plans.
Center console in next post.