Parts Needed

[Duke]

Hmmm, I can't get the link to paste....why is there a smiley in it?

Man, I'm so lame on the computer-tech-stuff.

 

[nevrenufhp]

Basic interior, need 2 more to fill it.

 

[Duke]

I guess you really need trans temp for your ally?

 

[nevrenufhp]

It really does! It'll go past 220 in a hurry in the summer time driving thru town(over 26000lbs daily). It's has the trans replaced once already, and 2 rear ends...I have no idea how that could be :Sly

 

[dondiesel444]

you guys have the new dash, my IH had the old style dash and a bare bones cab, there were empty spots in the dash for more factory gauges but I had no idea how to put them in.

 

[Duke]

I think it would be near impossible to add any gauges to the stock cluster at this point.
Best you could do is to order a new cluster with a gauge package, or get one from a salvage yard.

 

[Duke]

NeverenufHP,

I found a cluster with one more gauge than you have for sale on ebay. Here it is:

http://cgi.ebay.com/ebaymotors/ws/e...ry=50466&item=4529717074&rd=1&ssPageName=WDVW

Has AMP & Volt gauge

Any idea what sender goes into your ally? I was wondering if a cluster with a trans temp gauge could be used with a manual trans. If they take the same senders, it definately would.

 

[nevrenufhp]

I wish there was an online parts lookup for IH. It's not looking too cost effective to buy all that to add an ammeter. I guess I better stick to aftermarket gauges.

 

[Duke]

It's only gonna sell for $100 bucks. That cluster is really expensive. Auction ends in 4-5 hours! Go for it!

 

[spg]

Looking for a 3.38 or 3.54 center section for a 2001 International 4700LP with an S150S Rear end if anyone has any suggestions

 

[Markinter]

Here is a link for MD (new) parts. Dual exhaust, chrome bumpers, etc. Once on the main site you can check the other links.

http://www.mediumdutytruck.info/

 

[spg]

Thanks for the tip but nothing there that led to rear end parts that I could find.

 

[Markinter]

Thanks for the tip but nothing there that led to rear end parts that I could find.

Sorry spg

I was just posting a general post for parts not responding to your post.

Mark