ball joint ?

[aaklingler]

Does it take something other then one of the ball joint press kits with the 3 receiver tubes to remove and install ball joints on a 96 dana 60?
Thanks,
Allen

 

[Diesel_brad]

all you really need is aBFH and a socket to fit it correctly.

 

[aaklingler]

how do you get into the lower one with a hammer?

 

[OLDBULL8]

http://seven.three.superdutypsd.com/index.php?pr=Ball_Joint_Write_Up

Detailed explanation, with pictures. Socket it to em.

 

[Diesel_brad]

how do you get into the lower one with a hammer?

I used a 3/4 drive socket(forget what size) w a 12" extension to reach down thru thru the upper BJ hole

 

[aaklingler]

Where is a good place to buy good quality ball joint?

 

[Diesel_brad]

i like moog. think advanced,auto zone and napa carry them. make sure to get greasable ones

 

[aaklingler]

As far as I can tell looking online advance has moog but not napa or autozone. Has anybody used ball joints made by spicer/raybestos? Where is a good place and what is a good brand of u-joints to get?
Allen