Yes, it makes sense. if no fire in the wires going to the glow plugs means the glow plugs don't get hot and no start. I checked the bypass wire which I installed and with the ignition key on and the bypass switch on, I have fire going to the Relay. Which post on the relay exits to the glow...
It was starting immediately everytime. Then one day when I tried to start it, the glow plug relay would click but the truck would not start. Then the water pump started leaking so I took it to a mechanic in town to replace the waterpump and I also told the mechanic that the relay was clicking...
I grounded my test light and tested the wires that snap on my glow plugs but the wires are not hot even with my starter switch and by pass switch on. I am getting fire to my relay but nothing in the wires that snap on the glow plugs. I think those wires are supposed to be hot so as to heat the...
Yes Mr. Baily, I have already bypassed the controller and installed a manuel switch in my dash. It still will not start. I live in West Central Texas so as a rule it does not get too cold in the winter here. There are times when it gets really cold but most of the time it don't get below 35...
Thank You for the information and pictures of the relay and wiring. I did the same thing that you have done. I put a wire from the relay to my dash and put in a switch. I turned on the switch and counted to 10 and tried to start it. Nothing different, it would not start. I then checked my glow...
glow plug relay clicks continuously while the key is on but the engine won't start. before this issue of not starting, I would turn on my key, wait about 4 seconds and then start right up. Now, I turn on the key, the glow plug relay clicks multiple times but won't start. I replaced the glow...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.