Search results

  1. J

    Quick core support question.

    Most commonly. But it was available with factory air too. Sent from my moto g(7) using Tapatalk
  2. J

    Quick core support question.

    I'm modifying my core support to swap to the tall radiator vs the wide. My wide core has a rubber sheet that's pinned to the bottom of the core on one side and the other lays in the bottom of the bumper. Essentially a big rubber air deflector. Does the factory tall radiator have a piece like...
  3. J

    aluminum vs. copper radiators

    I run Final Charge. Sent from my moto g(7) using Tapatalk
  4. J

    aluminum vs. copper radiators

    Got mine mocked up last night. Now to build a new lower loop. Sent from my moto g(7) using Tapatalk
  5. J

    aluminum vs. copper radiators

    I've read some of those before. I just ordered an aluminum radiator from Champion, but I went with the 2 core American Eagle 1" tube one. I'm slowly working on getting it installed. I'm converting from the short/wide radiator so I have some fab work to do. Sent from my moto g(7) using Tapatalk
  6. J

    Crew Cab Headliner Removal

    I was able to squeeze mine out a back door, but put it back in while they were replacing my windshield. Sent from my moto g(7) using Tapatalk
  7. J

    1990 and 1994 body parts exchange?

    I believe the core support is different. The doors will fit but the interior panels are different. Sent from my moto g(7) using Tapatalk
  8. J

    What filter on a 4770 filter head?

    That one looks like it's too wide for the base too. Gasket needs to be under 3". Thanks though. What would the price be on a plugged head? Sent from my Nexus 6 using Tapatalk
  9. J

    Anyone put both batteries on one side?

    I tried to figure a way to mount the standard group 65 to the passenger fender area, but gave up. There is too much other shit in the way. I ended up putting the second battery in the box under my flatbed. Sent from my Nexus 6 using Tapatalk
  10. J

    What filter on a 4770 filter head?

    Yeah, I've seen that. It's over 7" tall though so it won't fit in the factory location. I may be stuck, I've not been able to find any shorter ones. Sent from my Nexus 6 using Tapatalk
  11. J

    What filter on a 4770 filter head?

    33417 is the filter I have. I replaced the head because the fuel heater plug was leaking and the previous owner had jacked it up trying to seal it off. Sent from my Nexus 6 using Tapatalk
  12. J

    What filter on a 4770 filter head?

    I replaced my leaking stock head with the wix 4770 head. Now I need to find a fuel water separator filter that will screw on it in the factory location (7.3). I thought the normal filter would work but the filter gasket is bigger than the base. Anyone have a number that fits? Sent from my...
  13. J

    Someone whats this for

    Probably the drain hole for the valley pan. Sent from my Nexus 6 using Tapatalk
  14. J

    Altitude affecting Turbo IDIT causing smoke?

    Good looking truck. Small world too. I'm in Salt Lake County, a member of RME, and I used to work with slc97sr5's father-in-law. Sent from my Nexus 6 using Tapatalk
  15. J

    Tire choices

    Pure nitrogen doesn't fluctuate as much as air. In these old truck it's really no big deal. Where it helps is in newer vehicles with tpms systems. Sent from my Nexus 6 using Tapatalk
  16. J

    Tire choices

    Most, if not all, current load range E radials are 8ply. They are generally marked 10PR. Which is 10 play rated. Equivalent to a 10 ply bias. Sent from my Nexus 6 using Tapatalk
  17. J

    thrown rod reasons

    Are you looking at that crew cab in Lehi? Truck looks pretty nice from the pics. Sent from my Nexus 6 using Tapatalk
  18. J

    R&D IDI

    My pump arrived today. Sent from my Nexus 6 using Tapatalk
  19. J

    R&D IDI

    I shipped my R&D IP back for warranty. It was delivered to R&D Oct 10th. I just got a tracking number for it coming back Wednesday. Today the tracking number still says waiting to be picked up. Sent from my Nexus 6 using Tapatalk
  20. J

    Looking at a truck. Opinions?

    Finally got the flat bed on it. Not mounted yet, just sitting there. Sent from my Nexus 6 using Tapatalk
  21. J

    Looking at a truck. Opinions?

    Good news! Sounds like they are going to let me return it for a refund. So, where to get my 088 rebuilt now? @Thewespaul do you rebuild? Sent from my Nexus 6 using Tapatalk
  22. J

    Looking at a truck. Opinions?

    I have contacted the seller but haven't heard back yet. Sent from my Nexus 6 using Tapatalk
  23. J

    Looking at a truck. Opinions?

    Don't know if that first one worked. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F292320087651 Sent from my Nexus 6 using Tapatalk
  24. J

    Looking at a truck. Opinions?

    https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F291653021708 Sent from my Nexus 6 using Tapatalk
  25. J

    Looking at a truck. Opinions?

    Yes. The intake side fits great. Spins free with tight tolerance. Sent from my Nexus 6 using Tapatalk

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,785
Members
24,099
Latest member
IDIBronco86

Members online

Total: 629 (members: 2, guests: 627)

Share this page

Top