I did clean it and it made a difference but now its back to having no balls on take off. Will oil make it slow cuz I just got this truck and idk when its been changed?
96 F250 7.3 powerstroke 5 speed with 206*** miles i pulled the filter out and cleaned the fpr screen and also before i tried to pull the fpr screen out by taking out the 2 bolts on the side and pulling it apart but i couldnt so i put that back together and cleaned it through the filter housing...
Hey my 91 intercooled radio doesn't work I got a new one hooked it up right and nothing. I checked the fuse it has power on both ends so it's not there then I check the wiring harness power and nothing. What could be the problem? Is it my fusible links and if so where?
i replaced everything on the rear and bled it and brake pedal goes to the floor. then i discovered a leak right under the driver door out of some module thing i dont know what it is to replace it but its got 4 metal lines that run to it 3 small 1 big and a bleeder on the front. does anyone know...
Hey yall im doing my rear brakes because the master cylinder front slot for the rear brakes is empty and the truck barely stopsif i slam the pedal to the floor theyll lock up....i pulled the drum off the passenger side where it was leaking a while back. Could the leak be coming from the wheel...
Well I finally got my truck to charge after I found a wire that wasn't plugged in it was the fusible link that goes to the alternatorcookoo but now that i got that fixed my left blinker stays on wether the trucks is on or off. What could it be? I found a plug that's hooked to the battery that...
i traded my 92 idi out for a 91.5 w250 cummins and it was the best investment for me too. they start so quick and the waterpump is only 2 bolts(i just replaced mine) its really easy! i liked the idi but love the cummins more.
Well I figured out that if you go easy with the throttle then it shifts too early but if you go 1/2-full then it shifts like it should. What does this mean? Also abs light hasn't came on anymore.
Does the abs light cause the transmission to shift weird? I'll get going down the road and it'll shift so smooth then the abs light comes on and it shifts early and bogs the motor. Changed the rear diff sensor with a new one and it does the same thing. The tps is adjusted to 1.02 at idle. Also...
Well finally got it together and now that it hasn't been ran in over 2 weeks when I started it there was a thumping coming through the intake but it was a cold cold start since its been in the 50s here for a week so I let it warm up and it kinda went away and hit the gas and it quieted down a...
Today i took out the radiator and cleaned everything up inside and out. I just got this truck a few weeks ago only needing a water pump. When i took the bottom hose off all of this red liquid came out(Bars Radiator Stop Leak) its all gunked up in the bottom and the heater hose that connects to...
When i went to fastenals website i looked for shorter ones like what i posted. It says their shorter than the ones at napa so i thought they'd work without trimming :dunno but ill take up your suggestion on Napa but hopefully they have them in stock if not i might try fastenal
Napa 5/16 -18...
Ranovru: I did get the new bolts and used them but the driver side top bolt stripped. I did compare the new ones to the old and the new ones are slightly longer than the old ones.
Stumiister: Do you recall what the length was on the helicoils?
Are these the right ones?
http://www.fastenal.com/web/products/detail.ex?sku=0185961&ucst=t
Thanks George D. I guess that's what ill have to do. The cover looks too hard to take off without disassembling the front of the truck to get to it. Will Advanced have taps? :confused:
Well i was installing a new waterpump and was tightening on the top 2 bolts and the driver side on just kept going didnt tighten at all or even seem like it grabbed on. Now i dont know what to do:mad:. Also how hard is it to remove this front cover while the motors in the truck? I have 2 parts...
Alright i will have to reset it. When i did the engine wasnt warm i set it. The truck wasnt even ran for 3 days when i set it. would that cause the speedo to work for a little then quit even after i installed a new one? Everything worked before i adjusted it but before it shifted like crap. Then...
Ill have to check the fuse but i do know that the clip is broke on one side and is kinda loose. Where could i get the clip? Also i adjusted the TPS before i touched the VSS. The truck sat for 2 days then i adjusted the sensor (dont know if it means anything). After the adjustment of the TPS i...
I got one like this
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Digital-Multi-Meter-Dorman---Conduct-Tite_5760112-P_N3065_A%7CGRP2020A____
An under adjusted TPS will cause the spedo/vss to be in accurate and not work at all?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.