Search results

  1. 93_444idi

    96 cummins swap

    haha thanks man. it's such a slow project! but it's gettin close now. little update. more done than it looks, but I'm not sure what to take pictures of lol engine runs great, intercooler pipes are done, downpipe is made up, fuel pump installed. Had a makeshift driveshaft in it to move...
  2. 93_444idi

    Fummins charging system help needed

    Just use an external voltage regulator. They're like 20 bucks. 2 wires, one connects to the post on the alternator closest to the passenger-side fender, the other Ts into your ignition-on wire that runs to the other post on the alternator. Can post pics if you like of my setup.
  3. 93_444idi

    96 cummins swap

    I used fordcummins mounts but redrilled the holes to set the engine an extra inch further back. There's about an inch and a half between my radiator and fan. Shroud fit without modification and the tranny bolted in using the stock frame holes. And thanks! Cant wait to get it going down...
  4. 93_444idi

    96 cummins swap

    for comparison next to a 4wd 3500. needs 1" in the front and dropped 2" in the rear. Its all together minus the wiring, piping, driveshafts, pedals, transfercase shifter, and electric fuel pump. So I still have most of it to go lol progress though. Still have to replace rotors...
  5. 93_444idi

    96 cummins swap

    haha yep! made my day finding that out
  6. 93_444idi

    96 cummins swap

    thanks man! will do
  7. 93_444idi

    96 cummins swap

    17k new posts since the last time I logged in lol anyways, figured I'd update. I sold my idi because of a deal on a superduty I couldn't pass up. $500 for a crewcab longbed 4wd 99 powerstroke. I was already planning on swapping a cummins in my 93, so I'm putting it in this superduty...
  8. 93_444idi

    factory turbo / engine / luk smf and clutch

    63645, opposite side of missouri from you. I'll let ya know if things fall through with Still Strokin, he asked first. And yeah, it's about 20 min south of Farmington. I'll give you a call this afternoon Paul.
  9. 93_444idi

    factory turbo / engine / luk smf and clutch

    I live about an hour NW of cape girardeau in Fredericktown, MO. The motor is still in the truck atm, you can hear it run before you buy. Or if people want I can take a video of it running
  10. 93_444idi

    factory turbo / engine / luk smf and clutch

    bump. $800 for all of it or I'll scrap the motor and try selling the turbo kit with the aftermarket parts for $700 on here and ebay.
  11. 93_444idi

    factory turbo / engine / luk smf and clutch

    900 obo. want this stuff gone.
  12. 93_444idi

    factory turbo / engine / luk smf and clutch

    i dont want to start selling individual pieces just yet.. would like to sell it all together.
  13. 93_444idi

    factory turbo / engine / luk smf and clutch

    Not sure of mileage on engine, it's a remand jasper engine. It has a hypermax cowl intake and a banks 3" downpipe that will go with it, along with a luk single mass flywheel and clutch, an extra fuel pump, lift pump, glowplug relay, oil pan (the one on it has a bung for an oil temp gauge I...
  14. 93_444idi

    93 f250 build

    if youre looking for a little more boost, wrap the crossover pipe that goes from the driver's side exhaust manifold to the up-pipe with exhaust wrap. I don't know if my max boost went up much, but it comes on sooner. Can definitely tell a difference, cheap upgrade.
  15. 93_444idi

    Trying to identify turbo

    I called the company with the turbos with the same part number, it is a gt3782. I should be able to find the wheel now, it's a somewhat common turbo. Thanks for all the help guys, I appreciate it. And Russ, if you can do a price check for me I'd appreciate it. I'm hesitant with these...
  16. 93_444idi

    Trying to identify turbo

    Thanks for the info man. I'm just having a hard time finding parts for this thing. Through garrett's website I found a turbo that seemed identical (gt3782) but it had a t3 exhaust flange, not a t4. I guess I'll give Honeywell a call tomorrow. I found one company in canada with 2 turbos with...
  17. 93_444idi

    Trying to identify turbo

    yeah, the compressor housing was blue as well, I did a little sandblasting on it. The previous owner said it has a 14cm exhaust housing, which should work for the application I'm using it for, but I can't figure out how to verify that. And the 1.11 turbine housing A/R makes me a little...
  18. 93_444idi

    Trying to identify turbo

    I need to buy a compressor wheel for this turbo and can't figure out what it is. I believe it's some sort of industrial turbo, it's a Garrett and was sold by AlliedSignal (a company that no longer exists). It has a 4" inlet and 4" outlet. I used a mic and the compressor wheel inducer is 60mm...
  19. 93_444idi

    Help please. fuel pump bad? or injector?

    There is an initial puff and then some steady white smoke on cold mornings until it warms up. I do have a spare used pump that was good when I pulled it. I'll have to do some researching on pump removal / installation
  20. 93_444idi

    Help please. fuel pump bad? or injector?

    I just started noticing this issue today, but I haven't been able to diagnose what exactly is causing it yet. My motor is a jasper reman with unknown mileage, I do believe it is reaching that 150k mark where the fuel system needs replaced. Symptoms: There is a new rattle under the hood at...
  21. 93_444idi

    Nice chrome wheels w/ tires: 265/70R17

    whats the offset like on these wheels? i just put some 17x9 mickey thompson classic locks on but they dont have much offset (which i dont like). i'm guessing you wouldn't be interested in trading wheels since youre saving for a pump/injectors. these have brand new rings though and no...
  22. 93_444idi

    dont buy glowshift a pillars

    I'm one week past the one year warranty... I'll call them tomorrow and see how anal they are about the "1 year". I'd like to just send them back and get my money back.
  23. 93_444idi

    dont buy glowshift a pillars

    update.. I've had 3 different issues with 3 different gauges. pyro is a digital gauge and occassionally shows readings all over the place. boost gauge jumps, doesn't operate smoothly. tonight the oil temp gauge apparently had a light go out, the off white back-color I was using is gone, just...
  24. 93_444idi

    Worst mpg thread

    diesels only? my uncles 460 79 bronco gets 4-5 empty. but it's also putting out about 450 hp. that was on 38" claws, might be better now that he dropped to 36" tsls my idi gets about 13-14 empty. i know if i turned down the fuel some it'd be better but I dont wanna risk losing hp.
  25. 93_444idi

    anything worth pulling off an 04 dt466?

    i guess thatd get me 6 of the 8 needed. are they much of an upgrade? my uncle has several psds with basic bolt ons, he might be interested. just wonder what the other 2 would cost

Latest posts

Forum statistics

Threads
91,299
Posts
1,129,921
Members
24,108
Latest member
Lance

Members online

Total: 479 (members: 10, guests: 469)

Share this page

Top