Search results

  1. medwards29

    medwards29

    Took the GMC to Ziebart and got the front windows tinted as well as the brow. Also got a Rhino-liner sprayed in and my old toolbox installed. Ordered some weathertech mud guards should get those in next week. Sent from my SM-G930V using Tapatalk
  2. medwards29

    medwards29

    Yes stock for now. I would say most I would ever do is tune, intake, exhaust/ DEF/DPF delete. Also if I ever have to replace something I typically upgrade it, but like I said, I don't want to play with it too much as it is my DD and I want it to last.
  3. medwards29

    medwards29

    Member from long ago finally returning. I have a 2011 GMC 2500 HD SLT with the LML. From the total loss of my Silverado and a Focus ST I traded, this is what I decided to get. This will be my first diesel and what a better place to come to than oilburners.net for support, diag, FAQs...
  4. medwards29

    Lightning M112 Supercharger For Sale

    what do u have in mind?
  5. medwards29

    Lightning M112 Supercharger For Sale

    price reduced to $400
  6. medwards29

    SCT X3 Handheld Tuner

    The X3 Power Flash is pre-programmed for use on the following vehicles: • 1996—2007 V-8 Mustangs, Cobras and GT500 • 1994—2007 V-6 Mustangs • 2003—2007 F-Series 6.0L Diesel Trucks • 1999—2003 F-Series 7.3L Diesel Trucks • 1997—2003 F-Series 4.6L / 5.4L Gas Trucks • 2004—2006 F-Series 4.2L...
  7. medwards29

    SCT X3 Handheld Tuner

    Hey I have an SCT X3 Handheld Tuner that is unmarried and has 5 unlocks left with the USB cable and disk. Be good for tuning a powerstroke. Has a bunch of strategy tunes built in that are all adjustable such as rev limit, speed limiter, tranny shift firmness, shift points, TCS, etc. Also good...
  8. medwards29

    Lightning M112 Supercharger For Sale

    I have a m112 supercharger that came off an 04 lightning. Guy I got it off of said it had 70,000 miles on it. I bought it to try to supercharge my 4.2L v6 f150 but was showing bottom end issues and decided to abort. I heard some people were interested in having a supercharged diesel truck so...
  9. medwards29

    V6 F-150 no cats

    So far so good. New ideas and plans for future mod. But first my current mods: Cold Air Intake: Ported, Polished, Knife-Edged, and Half-Shafted throttle body: Ported upper intake plenum: PCV delete: Cat delete with Flowmaster 40 SI/SO with dual tip: 180* Thermostat...
  10. medwards29

    V6 F-150 no cats

    update time. Cracked head and head gasket was split between cylinders 5 and 6. Lower intake manifold gasket was falling apart and the cyl 6 spark plug wasn't even threaded in all the way from the last time I took it in to get looked at. Results: Brand New Top end. Idles at 700-800 RPMS in...
  11. medwards29

    Removed my muffler

    v6 f150 no cats and no muffler, enjoy: http://www.youtube.com/watch?v=XMz5AKbk_tk These next two are with a higher quality camera so these are better: http://www.youtube.com/watch?v=RVKXODePz5A http://www.youtube.com/watch?v=T6YygeCgz5o just got bored and pulled the muffler off...
  12. medwards29

    V6 F-150 no cats

    I don't know I wasn't the mechanic.
  13. medwards29

    V6 F-150 no cats

    hell ya i do! lol, even though I didn't help too much with ur 6.9L, but stand around and look pretty, lol, oh yeah and lift that huge head with you that seemed to weigh a ton!
  14. medwards29

    V6 F-150 no cats

    I have finally solved the problem. Yes there was a small vacuum leak, the elbow under the plenum was split, but fixing it didnt change too much. Found out cylinder 2, 5, and 6 were all misfiring. 2 was completely dead, and 5, and 6 were still firing but were very weak, with low compression...
  15. medwards29

    ranger 4 cyl plugs

    thanks guys for the help. I would do it myself except it aint my truck to fix for one, lol and two I am living in a dorm going to college at the moment and my dad just needs to get up and do it, lol. 91idi suggested we try to do a 1 ton dually swap on the ranger lol that would be sweet.
  16. medwards29

    ranger 4 cyl plugs

    thanks for the advice. I buy everything bosch but I prolly wont get the +4 unless they are on sale that day, lol. Still waiting on dad to stop being lazy so we can take the diff cover off to replace fluid and gasket, as well as inspecting the gears.
  17. medwards29

    ranger 4 cyl plugs

    thanks man, that was actually out next step. We have to change the fluid and the gasket anyway so, will do. My dad heard from someone that there is some connector that is located under the drivers seat that corrodes and goes bad and shows the symptoms we are experiencing so we will check that...
  18. medwards29

    V6 F-150 no cats

    ok well i have tried looking for a leak but have found nothing, i have even checked the notorious splitting elbow connectors for the 4.2L but they all seem fine. And 91idi removed the intake hose from the intake and it quit running immediately, so does that say anything? I'm not an expert with...
  19. medwards29

    V6 F-150 no cats

    I'm almost positive there is a vacuum leak somewhere, but I talked to a fellow college and he told me that if the o2 sensors don't read right then it will retard my timing and cause it to run at lower idles and I assume with the combination of the exhaust leak at the manifold (from the broken...
  20. medwards29

    New Tool Box for Buzz

    Before: After: you like???
  21. medwards29

    ranger 4 cyl plugs

    well i have the vehicle posted in my sig, but its a 2000. Other details on the issue is that the rear diff seal is leaking about a few drips a day. I was just thinking that maybe the gear was put in at the factory with a void in the metal or a small crack or if there was damage somehow caused...
  22. medwards29

    ranger 4 cyl plugs

    my dads ranger needs a tune up and I'm thinking about using Bosch platinum +4's on it. He has the 4cylinder with 8 spark plugs, i think thats the 2.5L I4, but anyways, I heard that some 4 cylinder vehicles cannot use the iridium or platinum plugs because they burn too hot or something like...
  23. medwards29

    91idi's truck (molly) new exhaust

    Here is a video I took of 91idi's exhaust after installing a 3" pipe with a glass-pack. It's a lot better than the straight pipe he used to have, lol. http://www.youtube.com/watch?v=CFJnRzGcT0I
  24. medwards29

    Dream Project

    Heres the objects up close: Gas Cap: Headlights: Taillights (the Black One with chrome lens guard): Rims (Lorenzo WL21): Diff and tranny covers: Cowl Induction Hood
  25. medwards29

    Dream Project

    I have put a lot of thought into future customizations with my truck. Heres a drawing I mad of it with all my parts on it. So far I have a 2" Cowl induction hood and I am painting the edges black to help make it pop and I'm going to put a supercharged 5.4L V8 in it so I'm going to put 5.4L...

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,789
Members
24,099
Latest member
IDIBronco86

Members online

Total: 786 (members: 7, guests: 779)

Share this page

Top