Search results

  1. Bill-W

    more CL shenanigins...

    FAIL!;Sweet
  2. Bill-W

    Ebay IP

    Check out this thread: http://www.oilburners.net/forums/showthread.php?t=44748&highlight=uhaul
  3. Bill-W

    Question about Tires from Wally-World And Dealerships

    I ran the Tracker2 tires on my Explorer and Ranger a few years ago and never had an issue. They seemed to hold up well. Although I really like the Michelin LTX M/S I have on my truck now.
  4. Bill-W

    Getting rid of the donut fuel line seals?

    I would love to buy one, in fact I would only purchase it if you did make a profit! I do not have the time to research nor the access to the parts or the knowledge of what would be needed. Plus then I can say I stimulated your economy LOL
  5. Bill-W

    Divorced Gear Vendors unit

    I need to get one of those, the divorced unit would be perfect for my rig. Replace the pillow-block with the overdrive. Keep the stock rear shaft and have the front shaft shortened. Other than a mounting bracket I think it would work perfect. Now only I have $1500 laying around. LOL not this...
  6. Bill-W

    low budget cowl intake

    I've been wanting to do this exact same thing, thanks for the pictures, looks like a clean setup.
  7. Bill-W

    7.3 idi head studs

    Here you go, I also have it as a PDF's if the parties involved would like a copy please PM me. As I stated before if the mods feel the post is innapropriate please feel free to delete. I think we shoud all give him a call as wish him a merry Christmas :wtf: :idiot: -cuss posting your phone...
  8. Bill-W

    bricknose factory temp gauge vs. aftermarket gage readings

    I know back in my ranger days ford calibirated the gauges on them all over the place, they were more idiot lights than anything. With that said mine runs right on the A 90% of the time and occasionally see's the L. I have not found any rime or reason for it just some days it reads hot and some...
  9. Bill-W

    7.3 idi head studs

    It is!, you might want to check out his comments on the injectors and return line kit in my world that is not appropriate to say about anyone in a public situation! I have already reported it to ebay this morning and suggest every member here who appreciates the work that these guys to do help...
  10. Bill-W

    High mileage powerstroke

    It's most likely a hotshot truck that was running a flatbed. They swapped the flatbed onto the new chassis and grabbed whatever bed they could find, that was white, at the salvage yard. I see commercial yards out west all the time that are running flatbeds with all the original beds stacked...
  11. Bill-W

    Project Idea, IDI powered car

    I was thinking about a similar think thing, I've got a neighbor with a 70's Lincoln Mark???. It has a blown 460 in it, I was thinking the engine weight might be similar if not it would lower the front and then cut the springs in the back to even it out. If I was able to get a OD and some tall...
  12. Bill-W

    Vaccuum Adjustment IP

    The kick down on mine's not even hooked up, the PO bent it taking off the IP and whenever I have hooked it up it downshifts whenever I push even a little bit on the throttle. I have been running with it disconnected for a while now, other than having to downshift when you get bellow 30mph or...
  13. Bill-W

    block heater question

    I got my timer from Home Depot last year right after Christmass, it was a leftover on the lights isle. Rated for outdoor useage and has a digital timer on it which allows for 8 different programs broken down by weekdays, ends or individual days. Mine is set for 2 hours before work M-F nothing...
  14. Bill-W

    Wow... What a Price......

    If that thing sells for $50 I think I'm going to start a cottage industry of buying the kits for $30, cutting hose and putting on the clamps then I can sell them for $50!!! Any takers??? :rotflmao
  15. Bill-W

    block heater question

    I plug mine in for 2 hours when it goes bellow 32. Starts like a mid summers day. Otherwise it rattles like a power smoke and cranks real slow. It will start down to 0 but I don't like to put the wear and tear on it.
  16. Bill-W

    Tank Switching Valves

    I like that idea a lot!!! What type of valves are those? Where can you get them?
  17. Bill-W

    Interesting IDI

    A guy in my neighborhood has the exact same one! It just sits there never used, wont sell either.
  18. Bill-W

    heres a rare one

    Love it! I've been thinking about getting a cheap beater to commute with to my new job , I think that would fit the bill! :eek: Although I might never get there!:backoff That reminds me of my buddy's GT he drove in High school, I'm still not sure why they would make a "GT" version!:dunno I...
  19. Bill-W

    Timing help near Atlanta

    Thanks for the link and the offer to help;Sweet, 600mi is a little far though. I found this on fleabay, is this just the adapter or the whole timing unit? Would it get the job done? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=400154976692&category=43989&sspagename=DCP:RV:GI
  20. Bill-W

    Timing help near Atlanta

    Is there anyone on here who has the tools and knowledge around Atlanta GA that would be willing to help me check my timing on my truck? Or know of a decent shop in the area? I live 45 miles or so North of the city on US75 in Acworth GA and am willing to travel some to meet up with someone with...
  21. Bill-W

    Steamed (Radiator Issues)

    x2 but mine was a 3.0 Ranger! Never had a drop of oil in the coolant or a drop of coolant in the oil.
  22. Bill-W

    Block Heater Replacement

    I don't have any pictures of it, I will try and take one in the morning. I replaced mine with the NAPA brand replacement. The only differences was the cord was a strait plug instead of a 90deg plug and a little shorter, I was still able to get it through the grill though. I found it was...
  23. Bill-W

    Wiers sound when acelerating???

    This morning when driving to work the truck started to make a screeching sound when pressing the pedal past half way. Sounded like a belt slipping / metal without lubrication but it was directly related to the accelerator being pressed not RPM's going up. 1/2 to 3/4 pedal and it got worse but...
  24. Bill-W

    Turbo guys? Did i bend my firewall engough?

    I have the same shut of valve on my cheater bar! :rotflmao I though you stole mine when I first saw it!
  25. Bill-W

    you pick

    Crew Cab & Short Flatbed swap D60 front ZF5 or a built E4OD Turbo with a spare block built up in the garage or a 16v A company willing to pay what I am worth to them, allowing me to afford some of the dreams I have. But Debt is Dumb and Cash is King, the whole reason I bought her in the first...

Latest posts

Forum statistics

Threads
91,342
Posts
1,130,672
Members
24,142
Latest member
Cv axle

Members online

Total: 713 (members: 11, guests: 702)

Share this page

Top